Results 1 to 1 of 1
Thread: Changing old tap washer
-
21st September 2009, 11:10 AM #1
Most Valued Member
- Join Date
- Nov 2008
- Location
- Victoria Australia
- Posts
- 5,897
Changing old tap washer
I'm trying to get old taps off to change the washer and re seat the tap. After taking the cover cap off there is a spindle with 2 flats on. There is no thread on the spindle whatsoever (internal or external). Any ideas? They could be 1950's or 60's.
Read the full thread at RenovateForum.com...
Similar Threads
-
The $80 tap washer
By Ron Dunn in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 13Last Post: 25th July 2008, 03:36 PM -
Where does the washer go?
By Ferdelberger in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 8Last Post: 4th February 2008, 10:41 AM -
Where does the gig washer go?
By lateral in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 6Last Post: 7th March 2007, 09:37 PM -
Get the washer out
By Gingermick in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 8Last Post: 21st August 2006, 03:51 PM
Bookmarks