Results 1 to 8 of 8
-
26th March 2006, 09:09 AM #1Member
- Join Date
- Feb 2005
- Location
- Sydney
- Posts
- 65
Float and valve in cistern too slow
G'day,
Bit of a long story so bear with me. We've got a rainwater tank which supplies our toilets through an on demand pump. The problem is when you flush the toilet and the cistern refills, as the float rises higher the valve in the cistern slows the water flow down to a trickle, getting slower and slower as it approaches full. I would guess it takes 20 mins to fill the cistern with the last 19 mins being an absolutely miniscule trickle. This would be absolutely fine if the toilet were connected to the mains, but in our case this just causes the pump to cycle on and off for 20 seconds every 2 mins until the cistern is full.
Was thinking of buying a better float and valve for the cistern and was wondering if you think this will fix the problem, or if there was another way.
Thanks
-
26th March 2006, 11:32 AM #2Chief Muck-a-Rounder
- Join Date
- Feb 2006
- Location
- Central QLD
- Age
- 61
- Posts
- 74
Hi,
I had the same problem, I done as you suggested, problem solved.
Hope this helps.
-
26th March 2006, 11:42 AM #3Senior Member
- Join Date
- Jun 2003
- Location
- brisbane
- Posts
- 200
mabe you could mention the problem to your plumbing supplier I'm sure they will recomend the best cistern for the job.
-
26th March 2006, 01:44 PM #4
there are fast fill cistern valves on the market fluidmaster is the brand I think bunnies should have them or reece for sure
They fill with the water fully open and then shut off from open to closed in one go.
They should fix your problem.
Cheers IanSome People are like slinky's,
They serve no purpose at all,
but they put a smile on your face when you throw them down the stairs.
-
26th March 2006, 02:48 PM #5
I was gonna tell ya to get another valve, but they beat me to it, so I won't.
Boring signature time again!
-
26th March 2006, 04:01 PM #6Member
- Join Date
- Feb 2005
- Location
- Sydney
- Posts
- 65
Thanks for the replies everyone. Off to Bunnings ASAP.
-
26th March 2006, 09:33 PM #7
Errr now the horse has bolted, I personally dont like the Fluidmaster valve and wont use them because Ive had trouble with ones that others have installed. I use Caroma Quietflow valves, a little dearer but far better and easier to adjust.
Jack
-
27th March 2006, 10:16 AM #8Originally Posted by Jacksin
Regards ,Belaforge
Bookmarks