Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Join Date
    Jan 2005
    Location
    Adelaide
    Posts
    0

    Default Inexpensive small electric glue pot

    I had the need recently, and for the first time, to use Hide Glue.
    Having read on these excellent forums of the possibility of baby bottle warmers or wax pots to heat the stuff I did the appropriate Google searches and found that most of the wax pots were far too big for my purposes and I could not find any appropriate bottle warmers.
    And then I discovered the "La Petite Wax and Sugar Warmer" Attachment 124727which is available from a few internet sites and probably many beauty shops although I couldntīt find it in Adelaide despite visiting many of the city stores and discussing the application of wax and other warm liquids (not including glue) with a number of attractive and helpful young ladies.

    Some observations on the "La Petite" relevant to heating glue:
    1. The non stick pot capacity is 115ml and cooled, but stil pliable, glue can easily be peeled out as a cast of the pot leaving the pot quite clean.Attachment 124728
    2. The pot is not separable from the heater.
    3, Max achieved temp. (measured by me with a food thermometer) is 73°C
    4. Temperature is maintained within a two degree range.
    5. The heater stands on three small rubber feet but as the diameter of the pot is only 90mm this makes the pot slightly unstable.
    6. The internet price varies from $35 to $50. la Petite Wax Warmer 100g - Beauty & Nails was the cheapest I could find.

    I knocked up a crude base to increase stability and incorporated a small stand upon which to hang a brush.Attachment 124726
    Although my experience with hide glue is limited I feel this little heater performs most adequately the task for which it was not designed and can imagine it being of use to all those who need less than 100ml of hot glue at any one time.

    Cheers
    Jeff

  2. #2
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    Good find - I'm just at the point where I need something like this too

  3. #3
    Join Date
    Feb 2006
    Location
    Lindfield N.S.W.
    Age
    63
    Posts
    1,644

    Default

    I agree. That is a good find.
    Cheers

    Jeremy
    If it were done when 'tis done, then 'twere well it were done quickly

  4. #4
    Join Date
    Feb 2008
    Location
    Peakhurst
    Age
    67
    Posts
    0

    Default

    Quote Originally Posted by Tisorp View Post
    I couldntīt find it in Adelaide despite visiting many of the city stores and discussing the application of wax and other warm liquids (not including glue) with a number of attractive and helpful young ladies.

    Where are the photos

    BTW nice find.

  5. #5
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    Well done, good idea.Will have to make a note of that.
    Reality is no background music.
    Cheers John

  6. #6
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    3

    Default

    I have had a few projects where hide glue would have been the best option bit have made do with other glue due to not having a glue pot. That looks ideal.
    Regards
    John

  7. #7
    acmegridley Guest

    Default

    Doesn't Birko make a baby's bottle warmer?

  8. #8
    Join Date
    Nov 2009
    Location
    U.S.A.
    Posts
    5

    Default

    Its a good find, I need something like this. I wanna to see photos and some more detail.

  9. #9
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default

    I don't comprehend the brush hanger. If you keep the brush out of the glue, it will set hard and then what do you use to apply the glue?
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  10. #10
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Thumbs up

    Thanx!! Good find!!

  11. #11
    Join Date
    Jan 2005
    Location
    Adelaide
    Posts
    0

    Default

    Quote Woodwould: "I don't comprehend the brush hanger. If you keep the brush out of the glue, it will set hard and then what do you use to apply the glue?"

    When in use the brush hangs in the hot glue with the tips of the bristles just touching the bottom of the pot. The principal advantage is that the base of the brush (above the bristles) does not become covered in glue which can then drip inconveniently.
    At the conclusion of a glueing session, while the glue is slowly solidifying in the pot, it has been my practice to rinse the brush in warm water and hang it to dry somewhere where I will be able to find it next time (ie next to the pot.)

    Attachment 124796 Attachment 124797


    Cheers

  12. #12
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default

    Quote Originally Posted by Tisorp View Post
    When in use the brush hangs in the hot glue with the tips of the bristles just touching the bottom of the pot.
    Ah, the pot must be shallower than it looks. Might I humbly suggest that if your glue drips inconveniently off the brush, that the glue is too thin.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  13. #13
    Join Date
    Jan 2005
    Location
    Adelaide
    Posts
    0

    Default

    Quote Originally Posted by Woodwould View Post
    Ah, the pot must be shallower than it looks. Might I humbly suggest that if your glue drips inconveniently off the brush, that the glue is too thin.
    Thank you for this piece of useful advice. It was more a theoretical precaution than one born of necessity but I now have a practical guide to the appropriate consistency of the heated glue. The pot is about 48 mm deep.
    Cheers Tisorp

  14. #14
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default

    Tisorp, you're welcome. You can read a bit more about animal glue here.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  15. #15
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    I'm afraid eight year olds have priced themeselves out of the market
    Merry Christmas every one

Similar Threads

  1. Small electric hot water systems...
    By Batpig in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 10th March 2008, 09:26 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •