![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
22nd September 2007, 01:09 AM #1
Member
- Join Date
- May 2007
- Location
- Williamstown, Victoria
- Posts
- 65
New colourbond roof for bull-nose veranda
Currently have 6 mtr veranda that I'm going to extend to around 12 mtrs, including adding a 90degs bend around a corner.
The current metal roof is the standard zinc (no colour), so I will probably ditch the current material and buy new colour bond for the whole veranda to match the colour of the house roofing.
My question is can I order colourbond bent to the shape of a bullnose, or should I leave this to the experts? Also is it easy to cut the sheets (as I will need to for the corners, etc)?
If I can order it, any recommendations?
If not, any recommendations for roofers to just fit this section?
I am in Williamstown, Melbourne.
Thanks.
-
22nd September 2007, 10:02 AM #2
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
You just need to take a profile of the required radius to a roofing supplier, and they will have it rolled for you.The sheets are easy enogh to cut and fit if you have some skille.Try somewhere like Robot Trading,or ring around the roofing suppliers from the yellow pages.
Tools
Similar Threads
-
pergola roof over tile house roof
By Lbudgie in forum PERGOAS, GAZEBOS, STROMBELLAS & ROTUNDASReplies: 3Last Post: 24th March 2006, 05:58 PM -
Long span garage roof deck, more thoughts
By Wildman in forum DECKINGReplies: 4Last Post: 29th September 2004, 08:00 PM -
Painting a colourbond roof
By Gumby in forum PAINTINGReplies: 6Last Post: 26th January 2004, 09:50 PM