Results 1 to 15 of 15
  1. #1
    Join Date
    Sep 2008
    Location
    Melbourne
    Posts
    19

    Default Ryobi One 18V Cordless Hammer Drill

    I thought I would post this as there are not many reviews on this, and a lot of entry level handymen will by using these in the future due to BigB.

    I received a Ryobi One 18V Cordless Hammer Drill as an early birthday present (both the batteries on by 24V GMC unit were dead).

    This was the middle range in their offerings, there was a stand alone drill unit (no batteries or charger pack), the Hammer Drill pack with 2 batteries and charger (10mm chuck) for around $140, and a 13mm impact drill pack (2 batteries and charger) for around $200.

    The project I needed it for was laying some flooring in the roof after installing an attic ladder last weekend.

    The unit has a good feed and weight, a bit slimmer than by old cordless. The keyless chuck is easy to uses, and I didn't have bits coming loose like what happened regulaly on the GMC unit.

    The unit has a 2 speed switch on top, with a 24 speed torque collar. The first problem was that the hammer setting is a collar just in front of the torque collar, and a coupple of times I switched into hammer mode by mistake (the first time took me a couple of drill holes to figure out what was wrong).

    The trigger is pressure sensative, and took a while for me to get used to (I'm used to only lightly appling pressure to make release quicker). The reverse switch is easily used left or right handed, but it is very easisly knocked. Luckly is has a centre stop position so I didn't run it in the wrong directo too many times.

    I can't comment on the batteries much yet, but I used it most of the morning on one charge.
    Last edited by Neil; 12th March 2009 at 12:41 PM.

  2. #2
    Join Date
    Oct 2008
    Location
    Melbourne
    Posts
    3

    Default

    Just purchased one of these myself - Will provide a review and model # details once I have had a chance to give it a run.

  3. #3
    Join Date
    May 2004
    Location
    California USA
    Age
    74
    Posts
    0

    Default

    Ryobi is a good home owners line. They are well built but the batteries and torque are not there. The price is right for the homeowner. For comercial use they do not hold up and the batteries will drive you nuts charging the m all the time. I keep a Ryobi on my boat. You get what you pay for.

  4. #4
    Join Date
    Oct 2008
    Location
    Melbourne
    Posts
    3

    Default

    I have found the batteries last quite well with the Drill for jobs around the house - Must confess I have not really put the drill through any serious heavy work.

    On the other hand, I also have the Ryobi 18V One Router (laminate trimmer) - Great for small edge work but under any loading the battery lasts only a couple of minutes and it really struggles with the load.

    They have both served their purpose well for what I bought them for - but that said, I can see how they would really struggle in a commercial environment.

  5. #5
    Join Date
    Oct 2008
    Location
    Wagga Wagga NSW
    Age
    85
    Posts
    57

    Default Bekky

    Had a 12v Ryobi drill for about 18 months and find the batteries useless. They go flat sitting on the shelf after about a week. It then takes overnight to charge them. Too bad if you need to do something in a hurry.
    I now have an 18v Black & Dekker drill 1 hour charge 2 batteries, more convenient.
    I also have an 18v garden blower & whipper snipper, 4 batteries all up & all interchangeable.

  6. #6
    Join Date
    Oct 2008
    Location
    Melbourne
    Posts
    3

    Default

    Anyone had a go wi with the 18V Lithium batteries that are now available for the Ryobi One series?

  7. #7
    Join Date
    Aug 2008
    Location
    Bendigo
    Age
    51
    Posts
    0

    Default

    father bought into the Ryobi 18 V system. Purchased an angle grinder & 2 batteries.

    Same issue as tmac272 bought up. Batteries dont last very long and bogs down very easily.

    By the time he purchased the tool & batteries he was down close to $200.

    Put it this way, once I convinced myself of how useful a cordless grinder is (We cut a few pieces of 10 mm rod on many site jobs) I bought a grinder to match the batteries on my drills. Yeah Li Ion is a goer, although I cant vouch for the Ryobi variant because my stuff is a different brand (Hitachi).
    www.lockwoodcanvas.com.au

    I will never be the person who has everything, not when someone keeps inventing so much cool new stuff to buy.

    From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".

  8. #8
    Join Date
    Oct 2008
    Location
    Aelaide
    Posts
    1

    Thumbs up Ryobi 18V Drill

    G'day, I'm a relativley new member and this is my first post. I bought a 18V Ryobi Industrial Hammer drill about 8 years ago and I would have to say it has never faultered even though I have given it a pretty good workout at times. I do agree that it is easy to knock the forward/reverse switch and mine is quite a heavy unit as well compared to some of the newer drills available but it has served me well. However the NiCad batteries are next to useless now and need to be replaced but before they started to decline I could use the drill solidly for a full day on the two batteries.

  9. #9
    Join Date
    Oct 2008
    Location
    Melbourne
    Posts
    0

    Default

    just ran into ryobi's 18v li-ion batteries and charger at the green box

    can be used with all one+ series machines
    $150 per battery atm

  10. #10
    Join Date
    Apr 2006
    Location
    Melbourne Victoria
    Posts
    0

    Default

    LI Ion Charger was another $80 $230 upfront without the tool

  11. #11
    Join Date
    Oct 2008
    Location
    Melbourne
    Posts
    0

    Default

    and at $299 for the basic kit

  12. #12
    Join Date
    May 2004
    Location
    California USA
    Age
    74
    Posts
    0

    Default

    Quote Originally Posted by Sparhawk View Post
    I thought I would post this as there are not many reviews on this, and a lot of entry level handymen will by using these in the future due to BigB.

    I received a Ryobi One 18V Cordless Hammer Drill as an early birthday present (both the batteries on by 24V GMC unit were dead).

    This was the middle range in their offerings, there was a stand alone drill unit (no batteries or charger pack), the Hammer Drill pack with 2 batteries and charger (10mm chuck) for around $140, and a 13mm impact drill pack (2 batteries and charger) for around $200.

    The project I needed it for was laying some flooring in the roof after installing an attic ladder last weekend.

    The unit has a good feed and weight, a bit slimmer than by old cordless. The keyless chuck is easy to uses, and I didn't have bits coming loose like what happened regulaly on the GMC unit.

    The unit has a 2 speed switch on top, with a 24 speed torque collar. The first problem was that the hammer setting is a collar just in front of the torque collar, and a coupple of times I switched into hammer mode by mistake (the first time took me a couple of drill holes to figure out what was wrong).

    The trigger is pressure sensative, and took a while for me to get used to (I'm used to only lightly appling pressure to make release quicker). The reverse switch is easily used left or right handed, but it is very easisly knocked. Luckly is has a centre stop position so I didn't run it in the wrong directo too many times.

    I can't comment on the batteries much yet, but I used it most of the morning on one charge.

    Ryobi here in the states is considered a home owner tool. I keep one on my boat because they are cheap and I do not need a lot of torque or battery time. You can get an 18V here for around $69. I have not hadproblems with mine. I let my son use it when we built the new fence and used a few thousand screws. The drill did not hold up like other brands I own. Then again good ones run $250 and up here. For around the house and a little home workshop it should do fine. Ryobi makes a tool that will last at a cheap price.

  13. #13
    Join Date
    Sep 2008
    Location
    Melbourne
    Posts
    19

    Default

    Dropped it off the roof on Saturday (while installing a couple of Whirlybirds), didn't skip a beat.

  14. #14
    Join Date
    Dec 2007
    Location
    San Francisco, California
    Age
    76
    Posts
    0

    Default

    I have the 18volt set that I have used for the past 5 years. The batteries have held up well and I use it a lot. I have just purchased the new Li-ion battery and it is really good. Recharges in an hour and lasts longer. I have used the drill, the 5" saw endlessly and been quite abusive with dropping it and the like. I also have a newer Bosch 10 volt which is a very nice tool, and will drive 300 screws on one charge. However, the Ryobi has served me well and continues to work really well. Ihave found I need to be careful when adjusting the torque so that I don't break screws or drill too fast through something. It drills and screws into hardwood with no issue. The 5" saw is also really nice due to its sixe and portability.

  15. #15
    Join Date
    Dec 2007
    Location
    Theebine, QLD
    Posts
    5

    Default

    G'Day

    Batteries must be getting cheaper Look here http://www.global-batteries.com.au/i...FcQtpAodn115FQ

    I am looking to get a new drill and like the idea of getting a couple of Li-Ion batteries and being able to get many different toys which use those same batteries.

    Nobody on tis thread seems to be dead set against the RYOBI so I think that is the way I will go.

    Waz
    Never under estimate the power of stupid people in large numbers.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •