Thanks: 0
Likes: 3
Needs Pictures: 0
Picture(s) thanks: 1
Results 1 to 5 of 5
-
26th February 2022, 11:04 AM #1
The FH Clement CO, Disc & Bobbin Sander
This is my 1890's Disc & Bobbin Sander, which I am adding a Wadkin guard (bought from "Clear Out" a member of this forum) just propped it up to roughly see what it will look like, the Wadkin is a bigger disc, but still should be better than what had been fabricated for it by others before I bought it.
Disc Sander 2.jpgDisc Sander with Wadkin guard side view.jpgDisc Sander with Wadkin guard top view.jpg
-
22nd July 2022, 10:52 AM #2SENIOR MEMBER
- Join Date
- Apr 2013
- Location
- Brisbane
- Posts
- 623
What were the chances of that fitting or did you have to jury rig something up to fasten it to the machine?
-
22nd July 2022, 12:51 PM #3
-
24th July 2022, 03:27 AM #4Senior Member
- Join Date
- Nov 2010
- Location
- Sebastopol, California, USA
- Posts
- 175
It took me a minute to figure out the "bobbin" - I was looking for a fitting that would allow sanding of bobbins. We Yanks call them "spindle" sanders.
Does that bobbin bob - does it oscillate as it turns?
-
24th July 2022, 08:30 AM #5