![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Beaverpal Milling machine
-
14th May 2015, 05:48 PM #1
GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 2,956
Beaverpal Milling machine
I have an acquaintance that has asked me to look at his Beaverpal, milling machine, model PAL. As you hand feed it down there is no problem, but under power feed it has a ratchety feel to it. He bought the machine S/H, so doesn't know the history of it and not even a manual for it.
Has any one come across something like this problem before. Also it requires new seals, are they hard to get to.
Regards and Thanks
Kryn