Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Join Date
    May 2012
    Location
    Canberra
    Posts
    122

    Default Bright colourful stains.... Which wood is best?

    G'day moochers,

    I've a new project coming up, of reasonable size, that will need me either painting or staining a very large number of small parts for kids toys.

    Some time ago I asked about how "they" make the coloured kids blocks in $2 shops and BigW...it's obviously paint, but it sticks like hell. We (The Collective) decided it was electrostatically applied. Finding that gear or someone to do it was entirely prohibitive in costs...those I did talk to wanted very big bux.

    So, here I sit, having a nice strong espresso to fire up the neurones and thinking....What timber do I use that's hard, that takes a kid-colour stain and where do I get such stuff.

    I've seen Carrolls (CWS) and HW4CF's little pots of super mega stains. Nice, but I need more....all the usual primary colours and a few others, perhaps like the colours Lego uses...red, green, blue, black, yellow, orange....bright silly colours.

    Any ideas?

  2. #2
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Wood: Silver Ash

    Colour:

    http://www.ubeaut.com.au/dye.html

  3. #3
    Join Date
    May 2012
    Location
    Canberra
    Posts
    122

    Default

    Anyone know if they sell them bigger than 60ml?

    I was going to write, but the Ubeaut page says he's too busy.

    These are the pots I was referring to from Carrolls.

  4. #4
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    0

    Default

    From species to species, wood anatomy changes and so does wood chemistry, but to a lesser extent.
    As a post-graduate student, I made less than 2,000 microscope slides to investigate the success and
    failure of grafting, principally in fruit trees of commercial value.

    In the general case, woods which are very fine grained, no obvious early wood vessels (aka pores) and
    little annual transition from late wood to early wood of the next spring stained most easily. In other words,
    those with the most featureless anatomy were best.

  5. #5
    Join Date
    Jun 1999
    Location
    Westleigh, Sydney
    Age
    78
    Posts
    1,332

    Default

    The small pots of U-beaut stain will go a long way when you dilute them.

    Also, you can use food colouring.
    Visit my website
    Website
    Facebook

  6. #6
    Join Date
    May 2012
    Location
    Canberra
    Posts
    122

    Default

    Mr Ubeaut wrote back super pronto.

    I'll definitely give the 60ml pots a go.

  7. #7
    Join Date
    Jul 2015
    Location
    Tasmania
    Posts
    1

    Default Non toxic dye

    Hi, just browsing through. If you are colouring blocks for children then maybe a non toxic dye would be best. Edicol dyes have brilliant colours and will colour just about anything.
    cheers
    Min

  8. #8
    Join Date
    Jul 2010
    Location
    Horsham Australia
    Age
    81
    Posts
    0

    Default

    The U-beaut stains are non toxic and great value.

  9. #9
    Join Date
    Apr 2015
    Location
    Warragul Vic
    Posts
    0

    Default

    Quote Originally Posted by Robson Valley View Post

    In the general case, woods which are very fine grained, no obvious early wood vessels (aka pores) and
    little annual transition from late wood to early wood of the next spring stained most easily. In other words,
    those with the most featureless anatomy were best.
    In keeping with the above suggestion perhaps kauri (Agathis sp.) may be suitable .... no obvious grain, easily worked by hand and mechnical tools, pale in colur, paints glues, dyes eaily and evenly (for Evanism). My suggestion.

    Contact me Evan if you need some.

    Non toxic wood and dyes are vital for childrens toys. They WILL be put into mouths.

    Euge

  10. #10
    Join Date
    May 2012
    Location
    Canberra
    Posts
    122

    Default

    Absolutely. Fear and liability override all decisions front front to end these days.

    I'd sort of given up on this, but I'm still keen to know as painting multi-sided objects is still a problem for me.

    Obviously, the bigger commercial organisations do things in giant batches and specialised drying machinery... but then again, Ive seen first hand some dreadfully primitive setups. These simple operations solve the problem, but I cant

  11. #11
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,665

    Default

    If you do decide to use dye no matter what sort they need to be completely sealed with shellac or polyurethane or a number of coats of danish oil, etc.

    Oils and waxes won't seal them into the timber and they must be sealed in or you will be colouring the children, carpets, clothing, etc as they play with their toys.
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  12. #12
    Join Date
    Feb 2011
    Location
    Melbourne
    Posts
    206

    Default food safe colour

    Liability issues are always a concern. There is not muchpoint in using a food safe colour to then use a sealer over it that isn’t food safe.

    As Neil mentions, penetrating oils & waxes will not sealwater based dyes as there is nothing forthe oil/wax to connect to. However if one was to use a natural penetratingstain such as the Kaldet furniture stain, this can then be sealed with theKunos which not only traps the pigments into the surface but it is alsocertified food and toy safe. The blocks, depending on the size can be dippedand excess oil removed. The only issue with the actual colour is that the finerthe sanding grit, the less pigment penetration resulting in a lighter colour.Due to the nature of the materials, there is also a limit to the whole colourrange spectrum....but always good to make some test samples first.





    Livos Australia

    <O</O

  13. #13
    Join Date
    Aug 2015
    Location
    Melbourne
    Posts
    19

    Default 100 Jobs To Do

    What an interesting you have there. If you are using soft woods, then they have an uneven grain so you may have problem staining them. I heard that you can use a special pre-stain conditioner to help give this type of foods an even base though. If you are using hard woods, then they have a more even grain. So it’ll be easier to stain. But you may need to apply a few coats of to achieve the colour you want.

    There are many options you can use to achieve colourful stains for kids toys. Because they are for kids, you would want the paints to be as non-toxic as possible. Some popular examples are milk paint (available from Amazon), anna sova food paint, latex enamel and flour paint. I’ve stumbled upon a really interesting article on preparing kids toys by painting/staining them.

    The link to the article is as below:
    http://www.paintwoodentoys.com/

    Hope you enjoy reading it. Good luck in your project!

  14. #14
    Join Date
    Aug 2013
    Location
    Montmorency Victoria
    Posts
    25

    Default

    Quote Originally Posted by ubeaut View Post
    If you do decide to use dye no matter what sort they need to be completely sealed with shellac or polyurethane or a number of coats of danish oil, etc.

    Oils and waxes won't seal them into the timber and they must be sealed in or you will be colouring the children, carpets, clothing, etc as they play with their toys.
    I recently posted about dye on toys and the dye coming off if any moisture was put on them (read spittle)
    A number of folk suggested the Ubeaut dyes as the solution ... but as can be read above those dyes need a sealant .... my concern is not the food safe dye but the sealant

    Shellac is diluted with methylated spirit .... definitely not a safe mix for kids to chew on ... polyurethane would also be in that guild ... I don't know if danish oil is ok either

    Has the world moved on since the above posts in finding the safe solution please?

    Rob

  15. #15
    Join Date
    Apr 2012
    Location
    Shepparton
    Posts
    17

    Default

    CWS kid friendly stains can be mixed to change the colour and watered down to the colour you need. They are only small pots but if you use wisely they go a long way. They have to be sealed or they deteriorate.

Similar Threads

  1. Mixing / Matching Wood Stains
    By Bob38S in forum FINISHING
    Replies: 2
    Last Post: 26th November 2010, 10:42 AM
  2. Gel Wood Stains
    By Stinger9 in forum FINISHING
    Replies: 2
    Last Post: 17th September 2010, 01:03 PM
  3. Wood stains under shellac!
    By scoobs6170 in forum FINISHING
    Replies: 4
    Last Post: 1st April 2009, 09:58 AM
  4. Croda Wood stains
    By neilb in forum FINISHING
    Replies: 2
    Last Post: 24th September 2007, 06:36 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •