Results 1 to 8 of 8
Thread: how deep for fence
-
26th March 2008, 03:54 AM #1Novice
- Join Date
- Dec 2007
- Location
- NZ
- Posts
- 24
how deep for fence
Hi just finished setting out a 30m fence and going to hire a post hole borer tomorrow to do some digging, how deep is deep enough, its in clay and the posts are 2m long, I have seen a lot of fences sagging over so what would be a good depth?
-
26th March 2008, 04:16 AM #2Senior Member
- Join Date
- Mar 2007
- Location
- Melbourne
- Posts
- 60
600mm minimum lawful requirement
-
26th March 2008, 05:33 PM #3
Might be different in NZ.
Reality is no background music.
Cheers John
-
26th March 2008, 06:54 PM #4SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
-
26th March 2008, 07:19 PM #5Novice
- Join Date
- Mar 2008
- Location
- outer sydney
- Posts
- 21
-
26th March 2008, 07:31 PM #6
if you go under about 550mm the fence is likely to lean when the soil gets wet and the strong winds blow
-
30th March 2008, 06:12 PM #7
The fencer's "Rule of Thumb" is... 1/3 of the total post length.
(More, if it'll see lateral loads, such as it'll be used as a fence strainer or have a gate hanging off it.)
- Andy Mc
-
30th March 2008, 06:30 PM #8
2' (600mm) is minimum you want to go. corner posts and gate posts realy need to be 2'6" (750mm) and stayed along the fence line in every direction the wire comes from not streight into the padock. minimum stay length is 2m otherwise they may lever the post outof the ground.
let us know how you went.
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
Similar Threads
-
Gal Fence Posts in Rock: How Deep?
By strangerep in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 3Last Post: 22nd June 2007, 09:01 PM -
In deep & ya don't know it
By John Saxton in forum JOKESReplies: 1Last Post: 7th November 2006, 10:16 PM -
Deep..... very deep!
By Christopha in forum JOKESReplies: 0Last Post: 28th April 2006, 10:21 PM
Bookmarks