Results 1 to 4 of 4
Thread: Toilet Cistern Support
-
21st March 2008, 09:33 AM #1
That's SIR!!......Not CUR
- Join Date
- Jul 2003
- Location
- On the Downs, Darling SEQld
- Posts
- 420
Toilet Cistern Support
G'Day Ppl,
Been busy helping friend out.
We are relocating a Toilet.
What reinforcement is required within the wall to support the Toilet Cistern?
What height and how much? I am thinking I will use Gal Steel Stud material.
I will also need this info when I start fitting out my 'Shed'
Also looking to do the same for any wall brackets and Towel rails etc.
It would be good to get as much done ourselves before we get the Plumber in.
Ta.Navvi
-
21st March 2008, 12:31 PM #2
GOLD MEMBER
- Join Date
- May 2003
- Location
- Kuranda, paradise, North Qld
- Age
- 63
- Posts
- 2,026
Ivan,
I generally nog out between the studs with offcuts of stud material. If the wall sheeting is already up then it gets more interesting.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
21st March 2008, 03:01 PM #3
Retired Marine Engineer
- Join Date
- May 2005
- Location
- Newcastle
- Age
- 73
- Posts
- 1,064
Whatever you do use good quality stainless bolts , screws etc , cause when you need to remove it in 4 or 5 years
Ashore
The trouble with life is there's no background music.
-
21st March 2008, 04:13 PM #4
That's SIR!!......Not CUR
- Join Date
- Jul 2003
- Location
- On the Downs, Darling SEQld
- Posts
- 420
Ta Guys,
Just as I thought.
Making sure the height is correct.
Yes,
Like the SS316 fittings I have with Neverseize & Loctite
Navvi
Similar Threads
-
Retro fitted toilet cistern. 50's with 6/3 flush
By peter_sm in forum BATHROOM & TOILETReplies: 3Last Post: 6th May 2007, 07:16 PM -
Float and valve in cistern too slow
By Flyboy in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 7Last Post: 27th March 2006, 10:16 AM -
Hanging toilet cistern
By Skew ChiDAMN!! in forum BATHROOM & TOILETReplies: 6Last Post: 15th August 2005, 01:14 AM
Bookmarks