Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
3rd April 2024, 09:32 PM #1New Member
- Join Date
- Mar 2024
- Location
- Pelorus Sounds
- Age
- 67
- Posts
- 1
Tanner Thicknesser - Motor advice please!
I recently purchased a Tanner 12" Thicknesser which I plan use when I retire (shortly I hope) and am looking for some advice about the motor.
The motor on machine is 3-phase (400 volts I believe) which may not be practical for where I intent to live because 3-phase may not be an option.
My question is, should I buy an inverter/converter; have the motor rewired by an electrician or buy a new single-phase motor?
Any assistance would be greatly appreciated.
Cheers
Ross
-
4th April 2024, 06:38 AM #2
Welcome to the forum Ross, rewiring is not an option.
Changing the motor for a single phase is the least hassle as long as you match the mounting and shaft sizes.
Worst case is you have to fabricate a mounting adaptor and buy a new pulley.
Adding a single phase to three phase VFD is a good option but it depends if the motor is suitable for running off a VFD and will require the services of an electrician.Those were the droids I was looking for.
https://autoblastgates.com.au