![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 24
Thread: Woodworking Coffee Addicts II
-
7th February 2014, 01:23 AM #1
Woodworking Coffee Addicts II
Seeing I can't bump the old thread and it was entrapped within Bob's mass of water purifiers, filters and telemetry I figured I would start a new one
Let me start by saying it surprised me none that Bob was a coffee guru, when it comes to anything technical he is "The Man". Disappointed that on a my few visits to his I have never partaken in one of his creations though, you won't get away with it next time mate
I have always been a coffee lover and have played with all manner of presses, stovetops and gimicks over the years. This culminated in my working as a barista for around 3 yrs part time when I did my grad dip a few years back. Since then we have got by on passable coffee from a Delongi machine that was a wedding present. In most cases it manages to pump out a better coffee than the run of the mill cafes. For beans I purchase local roasts where available, 5 Senses, Yahava, Ravens (Denmark) when my brother visits, Yallingup Coffee (Dunsborough) when my mate visits and when all else fails Gloria Jeans from the supermarket (I know, it is not fantastic but beats most of the other off the shelf beans when a quick fix is needed).
So why have I started this thread now? Because I have just bought a single Group Carimali which is going to be plumed into a tank running rainwater all mounted in a portable coffee trolley topped with a slab of bluegum I milled a few years ago. So I am getting to mix my passionsOnce Carol the Carimali arrives I intend to give here some new timber group handes to match and will make a matcing timber handles tamper (just waiting on some stainless stock to machine my base out of).
Will post more pictures as it all comes together.
-
7th February 2014, 08:35 AM #2
Being a coffeeholic also, I'll keep this thread on my watchlist. Keep the updates coming burnsy
Sent from a far away Galaxy using Tapatalk proPat, Mid North Coast, NSW
-
7th February 2014, 09:00 AM #3
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 0
I respectfully request that you pay due deference to that slab of
blue gum and give it a good coating or three, on both sides, with
a high quality finish!!
-
7th February 2014, 09:21 AM #4
Congrats on the new machine...
The Carimali is a very capable commercial grade machine. I saw one for sale, just like this one on CS just recently...
You'll need a good grinder, to get the best from the beans, but I'm sure you're on top of that.
If you'd like a source of consistently excellent roasted beans... I would highly recommend Jeff at mycuppa. The beans will arrive with the roast date usually in the last week, so they keep improving for the next week or so... , 'Fresh is best'
Happy brewing...
-
7th February 2014, 09:48 AM #5
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Looks good Burnsy. Fresh rainwater helps make great coffee and I reckon it tastes better than filtered water.
Feel free to drop by anytime.
In most cases it manages to pump out a better coffee than the run of the mill cafes. For beans I purchase local roasts where available, 5 Senses, . . . . . . .
Delivery is only $4 and they have a good turnover of new beans and blends to make it interesting enough so I don't even bother with anything else these days. They have around 20 coffee buyers all around the world constantly looking at stuff for them.
[QUPTE] Once Carol the Carimali arrives I intend to give here some new timber group handes to match and will make a matcing timber handles tamper (just waiting on some stainless stock to machine my base out of).[/QUOTE]
Timber group handles sound like a good idea.
What sort of a blender do you have or are looking at?
-
7th February 2014, 07:39 PM #6
Artme, one coat of Organoil already on it, will be built on over the coming week once it is docked to size.
Andrew, the Carimali on CS and my new one are one and the same, one of the reasons I jumped at it was the rebuild thread showing it's complete strip down and rebuild in 2011, it went on the truck from NSW today
I am looking at a Mazzer Mini for a grinder, interested in hearing your take on the e vs the doser Bob as I see you have the doser and I am leaning toward the e.
-
7th February 2014, 08:21 PM #7
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
I have two grinders, the Mazzer for Caf, and an Iberital specifically for for Decaf beans.
The Inberital is a grind on demand grinder (not as fancy as the Mazzer as it cannot set a specific dose), but I like the manual doser better.
One issue is I have 7, 12, 14 and 21g baskets so I would need 4 (well 3 really because I never use the 7g basket) specific dose settings - of course the way around that is to get two grinders
Maybe it's just because that's what I got used to first place. People I know who have an e and just two basket sizes really like them
When preparing coffee for a group of people, the manual doser is a bit quicker whereas with the e grinder I have to wait for the grinding of every dose.
-
7th February 2014, 11:45 PM #8
From reading I am starting to lean toward the doser (good becuse it's cheaper
) It seems most report the e timed grind on demand doses are not that accurate as they are measured on time so often need an additional manual topup. As I always make two or more coffee's the doser is likely a good choice and can still be used to grind on demand easily enough.
-
8th February 2014, 12:11 AM #9
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Yeah thats is irritating. Too little is not too bad - too much is the pain. What I do with the manual doser is slightly overfill the basket and then scrape the excess off the top back into the doser.
With the other grinder I end up scraping it off into the knock box. The doser wastes some ground coffee because it leaves some grinds behind but it works out about the same if you are making a couple of coffees and less if you are making more.
-
8th February 2014, 12:31 AM #10
-
8th February 2014, 12:58 AM #11
I just use my Pharos.
20.3 grams in, 20.3 grams of pure fluffy heaven out....
I've also adopted the OE Slap-Shot method of dosing/tamping so there's not one little wasted grain....
Just coffee goodness... In spades...
-
9th February 2014, 02:58 PM #12
Change of plans re grinder as a Gino Rossi CC45 conical burr followed me home yesterday
I want to remove the dosing chamber and replace it with a catch cone or a fabricated shute. Anyone seen any good ideas? I have alloy to fab up a round shute so will try that first unless I can find a correct size alloy or stainless cone somewhere.
-
9th February 2014, 04:27 PM #13
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
-
9th February 2014, 06:22 PM #14
Was thinking the stainless versions of stick mixer cups I am pretty sure I have seen around the place. Possibly also inverted cocktail mixer, jam funnel or stainless vase. I am sure if I keep an eye out I can find one for far less than the US$230 it costs for a Mazzer Kony e one.
Will keep the measurements handy and see what I find, for now I will modify the doser inlet to help reduce grinds being caught by the lip that is there now and just enjoy using my new toys. Carimali was loaded Friday so probably won't see it for at least a week and a bit.
This is the doser inlet that needs "match porting"
-
10th February 2014, 07:29 AM #15
Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 74
- Posts
- 2,515
I am glad I drink tea. Less drama.
Similar Threads
-
KIAMA Woodworking exhibition, woodworking demonstrations, and tool and timber sale
By Greg Ward in forum EVENTSReplies: 5Last Post: 10th March 2013, 09:55 AM -
Woodworking Coffee Adicts
By Bushmiller in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 78Last Post: 1st August 2012, 10:16 PM -
Grr, thieving mongrel drug addicts
By Acco in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 11Last Post: 6th July 2012, 12:35 AM