![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Filling Oregon
-
16th November 2011, 01:56 PM #1
Member
- Join Date
- Sep 2008
- Location
- Swan Hill
- Posts
- 0
Filling Oregon
Hi
Just wondering what the best product to fill knot holes nail holes etc in some Oregon beams that have been re machined from old pergola to make a new bench in the new pergola? Looking at a clear product as plan is to put a clear coat on the top when complete
Regards
Stewy
-
16th November 2011, 04:56 PM #2
Novice
- Join Date
- Nov 2011
- Location
- perth
- Posts
- 8
Have you thought about using a UV stabilized clear epoxy resine? it does yellow a little in full sun, but nothing like what your normal epoxy's do.
For the smaller holes, like nail holes for example, you can just poor it in and let it set for 12-24 hours and sand it back, but for the bigger ones I tend to mix in a clear acrylic dust to get a nice thick resine, usually I would do a 1:1 mix eg 1 table spoon of resine to 1 tablespoon of dust.
If the holes go all the way through you will need to tape the underside up and sometimes it will pay to fill the holes in two parts.
Jordan
Jordswoodshop.com | Wood Working Blog and Video Podcast
-
16th November 2011, 09:08 PM #3
The Livos lady
- Join Date
- Feb 2011
- Location
- Melbourne
- Posts
- 206
ext filler
timber mate have a new putty suitable for exterior use. have you thought of puttying or colouring the old nail holes in black to highlight and any other imperfections with a colour to suit the timber? it'll make the features stand out. once dry, sand and finish.
Livos Australia
<O</O
-
17th November 2011, 11:52 AM #4
Jim
- Join Date
- Feb 2008
- Location
- Victoria
- Posts
- 596
With loose or non-existent knots there is the easy option of drilling the hole to fit available dowelling, glue them in and trim off. You then have firm 'knots'.
Cheers,
Jim