Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default Best finish for veneer

    Hello, I am going to have a go at veneering, and would like some pointers please. Can anyone please advise on some good reference work or links to expert advice?

    0.6mm veneer

    My first go will be some 0.6mm thick huon pine veneer with a bit of birdseye in it. The substrate will be 6mm MDF.

    Can anyone please advise on the best glue to use for this? I understand that both sides have to be done at the same time, and that the glue has to be nice and thin and evenly spread.

    Finally, what is the best finish for this? I have used Wattyl Scandanavian Teak Oil and Kunos #244 oil on timber boxes, but these rely on some absorption and reaction with fibres in the grain. I doubt if that would happen with 0.6 veneer, but would like some good advice on this please.

    2mm veneer
    The other option is to make my own veneer about 2 - 3 mm thick and glue it both sides to an MDF substrate. Would I have to allow for expansion in the box using this as a lid?

    Similar to above, what would be the best sort of finish to use on these? Would oil be effective?

    I would appreciate any ideas and suggestions, and will provide feedback. Rest assured, on the basis of my recent efforts, there will be lots of mistakes to learn from
    regards,

    Dengy

  2. #2
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default

    If its going into a press then Pva will be fine. You are right that both sides have to be done, but your comment about a 'thin' coat worries me a bit. I use a notched scraper with 1mm notches every 4mm, which puts the glue on just right for pva/press type work.

    If its important to you that it be removable at a later stage (ie restorations) then hide glue is the go. There is a bit of a learning curve with 'hammer veneering' and hide glue though, so your first one or two goes may not be brilliant.

    Cant really comment on finishig till we know what look you are going for.

    Cheers
    Arron
    Apologies for unnoticed autocomplete errors.

  3. #3
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default

    Thanks for this comment, Arron. I normally get a nice silky smooth semi-gloss finish on my boxes, and would like to match the veneered lid to the finish on the sides
    regards,

    Dengy

  4. #4
    Join Date
    Feb 2012
    Location
    Nowra, NSW, Australia
    Age
    66
    Posts
    0

    Default

    Dengy, this isn't directly related to finishing veneer, but I thought it might be useful anyway. Lots of good stuff on preparing/applying veneer:
    http://www.uniquelyveneer.com.au/dow...ers-inlays.pdf
    ... Steve

    -- Monkey see, monkey do --

  5. #5
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default

    Thanks kindly for this info, Hermit. As per another thread here, I am having trouble getting good information on veneering in general -it looks like this link contains a lot of useful information and excellent background reading about veneer.
    regards,

    Dengy

  6. #6
    Join Date
    Feb 2012
    Location
    Nowra, NSW, Australia
    Age
    66
    Posts
    0

    Default

    Quote Originally Posted by Dengue View Post
    Thanks kindly for this info, Hermit -it looks like it contains a lot of useful information and excellent background reading about veneer
    No worries. It was more suited to your other veneer thread actually, but I didn't see that one until I'd already posted.
    ... Steve

    -- Monkey see, monkey do --

Similar Threads

  1. Getting the right finish-Anegre veneer
    By michaeljohn1234 in forum FINISHING
    Replies: 3
    Last Post: 28th February 2012, 09:33 PM
  2. Exterior Veneer Doors, What finish?
    By Big Rick in forum FINISHING
    Replies: 2
    Last Post: 1st June 2011, 10:19 AM
  3. How to finish Quilted Bubinga veneer?
    By tktran in forum FINISHING
    Replies: 1
    Last Post: 15th March 2008, 09:59 PM
  4. Walnut Veneer Finish
    By ozPJ in forum FINISHING
    Replies: 16
    Last Post: 16th June 2007, 09:18 AM
  5. Veneer oil finish
    By alf t in forum FINISHING
    Replies: 1
    Last Post: 1st April 2003, 06:34 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •