Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
4th October 2010, 11:40 PM #1
conventional door into a folding one?
Since one of the kitchen doors is giving me headaches because it is going to take too much space and my neighbour had the same removed I thought I still need the darn thing to prevent smoke and odours drifting into the hallway and bedrooms. The solution I thought is to cut the door through the middle and hinge it in four places however there will be no guides or rail to support the second half. What do you guys think of this the door does not appear to be heavy it is just hollow.
Thanks
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
Help with links on hanging door and installing front door lock pls....
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 4th October 2010, 08:00 AM -
replacing roller door with sliding glass door
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 1st February 2009, 11:20 AM -
Garage door noise - panel vs roller door choice ?
By Justin in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 20Last Post: 17th March 2007, 07:16 PM -
How to remove Metal Door Frame (and put up glass shower door)
By makka619 in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 7Last Post: 11th October 2006, 02:41 PM -
Problems with floor joists/main beams on conventional slab
By Dawne in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 1Last Post: 11th July 2003, 07:07 PM
Bookmarks