Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: 2pack

  1. #1
    Join Date
    Sep 2009
    Location
    Sydney
    Posts
    12

    Default 2pack

    Due to the costliness of having a proffessional paint my project for me, I'm opting to use '2pack', as has been suggested to me by many parties. Could somebody please explain to me what this process is? What I understand is that it is a spray, but that is about it. How is it different from regular spray paint? Are there any skills/techniques/anything I should know before commencing?

  2. #2
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    3,538

    Default

    2pack means that is made from 2 different liquids, one will be the paint and the other is the stuff that sets it off or hardens it. Means it has a short time till it goes off once it has been mixed and does usually require a fair bit of skill to paint as it goes off very quickly once it has been sprayed onto the surface.

    Another thing to watch out for as well, is that most 2pack sprays are toxic and usually require very good respirators and spray booths
    Cheers

    DJ


    ADMIN

  3. #3
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    The only thing I disagree with DJ about is set time this depends on lots of ambient things and conditions. I would not spray 2 pack anywhere now, other than in enclosed spray booth fully geared up and suited up. It has been known to kill small animals should they be close enough to inhale fumes.

    Come to think about it wasn't 2 Pac the singer also a killer.

  4. #4
    Join Date
    Sep 2009
    Location
    Sydney
    Posts
    12

    Default

    Well, as a student, I evidently do not have access to a spray booth.

    What would you guys recommend (as an alternate finish)? Something relatively easy, not gonna kill me, and not too expensive.

    Would regular spray paint work? If so, what type, and would I need to use anything before/after it (sealer, undercoat etc)

    As you can tell, I'm very inexperienced in the area...
    Last edited by Powerb; 28th July 2010 at 07:03 PM. Reason: added more to the post

  5. #5
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    No problem so was I when 2 pack first came out as where even the companies who supplied the stuff.

    Ok this is the project your doing that great looking book nook I think.

    Where are you in Sydney? I'm western suburbs.
    Do you have access to a compressor and spray gun?

    Do you know anyone in the panel beating trade??

    A good quality automotive spray paint would look good one thats Enamel not 2 pack a litre would do you along with thinners. Yes and under coat would be required.

    Ray

  6. #6
    Join Date
    Apr 2006
    Location
    near Mackay
    Age
    60
    Posts
    0

    Default

    You might need to supply a bit more information for anyone to be able to offer any help.

    What type of project is it ?
    What have you built it out of ?
    What level of protection does the finish need to have, ie: is it a table that will cop a lot of use and abuse, or is it something that is just for display ?
    Do you want a high gloss finish or something that looks a bit more natural ?

    Sorry for the third degree but without knowing what it is your trying to achieve...........

  7. #7
    Join Date
    Sep 2009
    Location
    Sydney
    Posts
    12

    Default

    Quote Originally Posted by wheelinround View Post
    Ok this is the project your doing that great looking book nook I think.

    Where are you in Sydney? I'm western suburbs.
    Do you have access to a compressor and spray gun?
    Correct, thats what I'm doing. Having plenty of trouble finding finishing solutions, so I'm just gonna do it myself (with the help of you forumers of course!)
    I'm in south (i think). Canterbury, Ashfield etc.
    I MAY have access. A friends dad I did work experience with, I used one then, to apply laquer to strips of timber. I think that was a spray gun.



    Quote Originally Posted by wheelinround View Post
    Do you know anyone in the panel beating trade??

    A good quality automotive spray paint would look good one thats Enamel not 2 pack a litre would do you along with thinners. Yes and under coat would be required.
    I do (uncle), problem being, he lives on the QLD border.
    So, an enamel based paint. Start off with a litre, which should be enough. Undercoat required (any recommendations?).

  8. #8
    Join Date
    Sep 2009
    Location
    Sydney
    Posts
    12

    Default

    Quote Originally Posted by Ironwood View Post

    What type of project is it ?
    What have you built it out of ?
    Its a book nook, and made from 18mm raw MDF.

    Quote Originally Posted by Ironwood View Post
    What level of protection does the finish need to have, ie: is it a table that will cop a lot of use and abuse, or is it something that is just for display ?
    Do you want a high gloss finish or something that looks a bit more natural ?
    It doesn't really need a high level of protection. The main traffic will be on the seat, made of foam (obviosuly doesn't need painting :P )
    I'm thinking a natural look, closer to matte, rather than gloss. And I'm still unsure whether to paint it black or white. White would look nice, but get dirty easy, as well as match nothing in the room. Whereas black matches the TV, and my year 11 project.

    Quote Originally Posted by Ironwood View Post
    Sorry for the third degree but without knowing what it is your trying to achieve...........
    Don't apologise! Its great!

  9. #9
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    I've had good success using the cheap ($2) cans of auto spray from Super Cheap Auto on MDF.

    First seal edges with Timbermate putty, sand smooth, then 2-3 coats of primer, then 3-4 coats of colour, rub back with sandpaper if necessary, more paint, then buff to a good gloss with either auto paint buffing compound or the forum sponsor's Ultra-Shine stuff.

  10. #10
    Join Date
    Sep 2009
    Location
    Sydney
    Posts
    12

    Default

    Quote Originally Posted by Master Splinter View Post
    First seal edges with Timbermate putty,
    Are you talking about the same stuff you use to fill countersunk holes? I've never heard of this technique before... (But, as i've said, I have essentially no experience)


    Quote Originally Posted by Master Splinter View Post
    sand smooth, then 2-3 coats of primer, then 3-4 coats of colour, rub back with sandpaper if necessary, more paint, then buff to a good gloss with either auto paint buffing compound or the forum sponsor's Ultra-Shine stuff.
    Geez, thats a lot of coats, much thanks to MDF and its ability to absorb!!
    I'm not after a shiny effect, more of a matte colour, so how would I finish up in that case?

  11. #11
    Join Date
    Sep 2009
    Location
    Sydney
    Posts
    12

    Default

    Infact, would I be better off using a roller? I would get a more even finish that way wouldn't I?

  12. #12
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Quote Originally Posted by Powerb View Post
    Infact, would I be better off using a roller? I would get a more even finish that way wouldn't I?

    Depends on type of roller and paint used


    Have a read of this fellows Blog

  13. #13
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    0

    Default

    I know this might seem odd to some of you but I have had very good results with wattyl estipol sandind sealer under ( turps based) berger jet dry paving paint... both polyester.

    all the sanding sealer coats can be done with a brush....the top coats...well depends on how good you are.....I have brushed it and sprayed it......roller would probaly work too

    limited colour choice but it is tough and flows out well if thinned a bit.

    and goes off pretty smartly

    "Those free loaders will be walkin on it in 2 hours"

    works best if rubed in with some 1200 wet & dry, followed by some u beaut wax.

    just forget it is paving paint.

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  14. #14
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Yep, the Timbermate putty - thin it down a bit with water to make it easier to apply on the edges. Disclaimer - that's not what I use (I have a few litres of epoxy glue on hand, and that's now my preferred edge solution for a number of reasons...but I didn't think you'd want to spend an extra $35 buying a litre of botecote)

    If you spray (and do it well enough) you can really cut back on the sanding required...but you really need a spray gun to do it with any decent quality. You can also put on a number of coats quickly as acrylic lacquers flash-off (solvent dry) in minutes.

    My el-cheapo approach also involves soaking the spraycan in a sinkful of warm (50 degree-ish) water to improve atomisation and can pressure. Dry cans well before spraying!!

    There's a very good car/spray painting guide here - http://autofix.com.au/blog/how-to-re-paint-a-car

    And you'll find three coats is pretty much par for the course with spray - it can be even more with some types of paint, or if you are expecting to do a lot of buffing on the finish.

    If you want a matte finish, you are best off finding some sort of textured coating - a proper matte marks too easily, so faking a matte with a textured semi-gloss is a more sensible approach.

  15. #15
    Join Date
    Sep 2009
    Location
    Sydney
    Posts
    12

    Default

    I'll probably go with the roll, as its easier, and with not a lot of time left, I don't want to be dealing with any mistakes I make by not doing a good spray job (yes I know, I'm to blame for leaving it rather late)

    And a textured semi you say? I shall look into it when I head to Bunnies next.

Similar Threads

  1. Laminex Colourtech Doors(2pack)
    By Art Martin in forum KITCHENS, BATHROOMS, THEATRES, etc
    Replies: 2
    Last Post: 26th October 2007, 12:00 PM
  2. 2pack high gloss clear furniture finish needed
    By woodchisel in forum FINISHING
    Replies: 1
    Last Post: 19th August 2007, 08:55 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •