Results 1 to 5 of 5
-
29th September 2005, 11:38 AM #1Senior Member
- Join Date
- Nov 2003
- Posts
- 18
EEE Ultra shine + danish oil + shellawax cream
Hi all,
I have just finished a curio display cabinet (I'll place some pictures soon)
My question is related to finishing the cabinet. I have apply a first coat of organoil danish oil last night and will apply the second one tonight
I was reading some threads about finishing and also the ubeaut website and found out that I could use the EEE ultra shine wax on top of the danish oil to enhance the finishing
is there any risk in doing that ?
what type of effect could I expect after applying the EE ultra shine on the cabinet?
Finally after applying the ultrashine and providing the fact that it gives a good result, ubeaut mentionned that it is ready to apply shellawax or shellawax cream.
Could that be done as well knowing that the first 2 layers are danish oil
basically is danish oil + eee ultra shine + shellawax (or cream) a good combination that will give a better result that a simple danish oil?
Thanks
Eric
-
29th September 2005, 01:43 PM #2
EEE is a polish, works like super fine sandpaper & can be used on almost anything that can be sanded. It is not a finish.
Shellawax & shellawax cream are friction finishes, if they are not used on the lathe or with a powered mop, they require elbow grease. (rubbing in & buffing off)
They are NOT recommended to go over any other finish.
The Traditional wax can be applied over another finish if you are looking for an oil & wax result.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
29th September 2005, 06:13 PM #3
Using the EEE over the Danish will give a brighter finish as it works like a cut n polish on a dull car finish. However the oil must be hard dry for it to work well.
Do not use Shellawax or Shellawax Cream on this project they are basically designed for use on the lathe and will most likely bring you nothing but grief if used in the way you intend. As Cliff rightly said: "Shellawax & shellawax cream are friction finishes, if they are not used on the lathe or with a powered mop, they require elbow grease." and lots of it!
Cheers - NeilAre you a registered member? Why not? Click here to register. It's free and only takes around 40 seconds!
Register to get rid of the annoying ads, plus you are able to participate, see all the posts, photos, pdf's, and more.
-
29th September 2005, 06:20 PM #4Senior Member
- Join Date
- Nov 2003
- Posts
- 18
Thanks Neil and Cliff
I'll stick to the oil and EEE later on a a traditional wax
-
29th September 2005, 10:13 PM #5
this one...
http://www.ubeaut.com.au/trad.htmlCliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
Similar Threads
-
EEE Ultra Shine
By Gazza in forum FINISHINGReplies: 13Last Post: 3rd August 2005, 05:46 PM -
EEE ULTRA SHINE & Lacquer Repairs
By Richardwoodhead in forum FINISHINGReplies: 0Last Post: 11th April 2005, 12:42 AM -
EEE over Danish Oil
By oges in forum FINISHINGReplies: 0Last Post: 19th December 2004, 08:50 PM -
Danish oil: wiping off leaves streaks?
By jur in forum FINISHINGReplies: 5Last Post: 28th October 2004, 07:05 PM -
Oil change
By Iain in forum JOKESReplies: 1Last Post: 1st November 2001, 06:56 PM
Bookmarks