![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Safer than a Saw stop table saw
-
20th September 2023, 08:24 PM #1
Safer than a Saw stop table saw
Enjoy,
Seriously a lot safer an better for your health an no need too hook up a Dust extraction, Sorry Bob.
Facebook
Cheers Matt.
-
20th September 2023, 09:57 PM #2
Nice, but not so sure about the safety aspect, no blade guard, and the operator is positioned virtually beside the blade to operate the crank, and has a free arm/hand to wave around in the vicinity of the blade. Suspect that things going wrong could be just as bad as they would be with a powered saw, there is a far degree of inertia stored in the flywheel on the near side.
I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
27th September 2023, 04:00 PM #3