![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 10 of 10
Thread: G'day from Tasmania
-
25th May 2011, 01:30 PM #1
Novice
- Join Date
- May 2011
- Location
- Tasmaina
- Posts
- 4
G'day from Tasmania
G'day. I'm a 26 year old bloke from Sorell, Tasmania.
I left school at 13 to tail out in my old mans Mill, and have been in the bush ever since.
It was a dead rollered Breast Bench (scruff bench!!) and was powered by a 380 Ford Diesel truck motor.
We used to rip logs with Chainsaws if they were too big to be cut with a 42 inch saw in the bench.
Since then, I have built and used 3 Similar bench mills powred by both Perkins and BMC diesels.
Spent a few months working for the local Lucas Mill agent in 2009, and was impressed with them.
Built an Alaskan mill attachment for an 090 that I had and tried that. Backbreaking work.
Am looking at building a Swingblade mill similar to the lucas, but powered by the 090, so that I can do away with Gearbox, just need Lucas saw, and can make up a spindle from a truck axle shaft. A few Pulleys to get the gearing right and a few bearings, and a LOT of welding, and we should do it. Thats the plan anyway........
have also got a passion for old International trucks, and enjoy Driving the odd Skidder every now and then.
Does anyone have an 8 inch cut Lucas Mill saw that they would be willing to part with?
Or maybe even a mill??
-
25th May 2011, 03:03 PM #2
Senior Member
- Join Date
- Mar 2009
- Location
- Hobart
- Posts
- 410
Hi Mate and welcome on board. Regrettably I can't help you with what you are looking for but do I understand you correctly that you mill timber. I only ask in that I have some Huon Pine logs that need to be milled so that I can use the Huey in our place we are restoring at Pawleena.
If so can you perhaps send me a message (PM) and perhaps we can do something about that. Taking the 3 or 4 logs I have to a large mill simply isn't likely to be an option as I am sure they wouldn't be remotely interested. Dave
-
25th May 2011, 07:15 PM #3
Hey mate, welcome to the forum!
-
25th May 2011, 09:27 PM #4
Welcome to the forum.
Not able to help but someone will come along to reply and you might also want to post in the timber milling section.
SMALL TIMBER MILLING - Woodwork Forums
-
27th May 2011, 07:52 PM #5
Welcome to our little corner of the world.
Reality is no background music.
Cheers John
-
29th May 2011, 04:05 PM #6
Welcome. Not my area but I am sure here are plenty of people here to help/advise.
Michael
Wood Butcher
-
2nd June 2011, 02:25 PM #7
Novice
- Join Date
- May 2011
- Location
- Tasmaina
- Posts
- 4
Just brought an 090 and 070 this morning from the local Stihl dealer. 090 has 25 inch oregon bar and is complete. 070 needs a few bits (Starter).
-
4th June 2011, 02:47 PM #8
Novice
- Join Date
- May 2011
- Location
- Tasmaina
- Posts
- 4
Milling.
Spent a bit of time Milling Huon Pine into 30 and 40mm slabs today for another forum member. Was good fun. The old 090 Stihl and home made mill went well. Have never milled Huon Pine before and was raelly surprised at how soft it was even though it was dry.
-
4th June 2011, 02:49 PM #9
Novice
- Join Date
- May 2011
- Location
- Tasmaina
- Posts
- 4
Peterson Log Locust.
Thanks to another forum member for letting me know that the Mill I had seen powered by an 090 was a Peterson Log Locust. Has anyone had any experience with them?
-
13th June 2011, 10:46 AM #10
New Member
- Join Date
- Jun 2011
- Location
- Bli Bli
- Posts
- 1
caperata
I have a Huon Pine lounge I built in Tassie back in the 70's. I am now restoring it for the second time. Unfortunatley I used a marine Varnish the first time restoration. What is the best for this timber. I am currently stripping it right back. It is used on a covered balcony in Qld.
Similar Threads
-
G'day from rural Tasmania
By The Caveman in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 12th August 2008, 08:59 AM -
What is going on in Tasmania?
By woodbe in forum HAVE YOUR SAYReplies: 92Last Post: 12th May 2007, 06:07 PM