Results 1 to 13 of 13
  1. #1
    Join Date
    Oct 2005
    Location
    Townsville
    Posts
    10

    Default mould proof silicone

    Is it all that it is cracked up to be? I remember we did a bathroom in one of our rental properties and the silicone startedt o get mouldy inabout 12 months. Not sure what silicone hubby used at the time whether it was mould resistant stuff or not. How long would you expect the mould resistant stuff to be mould free for?

    Thanks

    Sandra

  2. #2
    Join Date
    Jan 2004
    Location
    South of Adelaide
    Posts
    136

    Default

    On the bathrooms I have done, once I have scratched out the old sealer I brush metho liberally into the gaps to kill off any mould. It dries quickly and so far I havent had any call backs.
    Jack

  3. #3
    Join Date
    Jun 2006
    Location
    Perth, WA
    Posts
    102

    Default

    Maybe this is true, but heard from a friend also into reno's is that the mould comes from our fingers when we run a finger over the silicone to smooth it out. skin particles and grease apparently. He suggests getting some non powder surgical gloves from the chemist to do the smoothing off process. Obviously on a bone dry surface free of dust etc.

    Maybe worth a try....D

  4. #4
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    If the silicone joint gets wet enough, long enough, it will develop mould.

    I spent years playing wack-a-mole and redoing silicone join lines to try to get rid of mould. Now I just spray them with bleach or domestos and give them a wipe down after a few minutes.

    I have found that the old fashioned sillicone seems to remain mould free for longer than the newer, clean up with water ones.

    However, I've just recently noticed that polyurethane sealants are on the market...mmmmm, new product to play with....

  5. #5
    Join Date
    Dec 2005
    Location
    Oz
    Posts
    0

    Default

    Silicone doesn't get moldy, there is nothing in it that a fungus can feed off. It's what's trapped behind it that allows the mold to grow, moisture and a food source. Where you're applying it has to be absolutely clean allowing the silicone to adhere well and therefore keep the moisture and food source out. But if the surface isn't clean enough the silicone will eventually pull away and allow moisture and "dirt to get trapped promoting the growth of mold. Which in turn will expand and cause the silicone to pull away more allowing more mold... You can use the fancy anti mold silicones but it will always come down to surface prep as to whether you can keep mold growth down. A final wipe down with alcohol before applying the sealant wouldn't be a bad idea. I say alcohol because it doesn't leave a residue that could cause adhesion failure. 70% alcohol will kill anything that's on the surface. Also mold needs a sustained 20% moisture content in what ever it's trying to establish itself in to grow well (it will grow at a lower moisture content but it's much slower) so good ventilation will go a long way to keeping mold in check.

  6. #6
    Join Date
    Jan 2004
    Location
    South of Adelaide
    Posts
    136

    Default

    Maybe this is true, but heard from a friend also into reno's is that the mould comes from our fingers when we run a finger over the silicone to smooth it out. skin particles and grease apparently.
    Dont know why you are using your fingers anyway. Once you have pumped the sealer on. give it very light spray with heavily diluted soapy water and finish it with the rounded end of an icecream stick.
    Jack

  7. #7
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Quote Originally Posted by Toolin Around
    Silicone doesn't get moldy, there is nothing in it that a fungus can feed off. ....
    I wouldn't bet on that....
    There is a mould that will eat the ferric oxide coating on recording media; video & audio tape & floppy disks.
    There is also a mould that will eat diesel fuel. :confused:
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  8. #8
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    And they just discovered a mould that kills locust swarms--
    no foolin its true!!!!!!!!!!!!!
    Regards, Bob Thomas

    www.wombatsawmill.com

  9. #9
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Heres how to get rid of mould, in an environmentally friendly way....

    http://www.abc.net.au/rn/science/ear...ies/s23877.htm

  10. #10
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Quote Originally Posted by Cliff Rogers
    I wouldn't bet on that....
    There is a mould that will eat the ferric oxide coating on recording media; video & audio tape & floppy disks.
    There is also a mould that will eat diesel fuel. :confused:
    Aah, yes, the joys of living in the tropics aye Cliff. Silicone will definitely go mouldy around here, not just surface mould either. When I worked on a dive boat the silicone in the masks (goggles to the unitiated) used to go mouldy right inside the silicone. This was despite spending a lot of time in salt water and being rinsed in an antiseptic bath several times a day. The mould in silicone (all types) around here seems to migrate from the surface right down into the material.

    Plus, like Cliff says, there's not much up here that isn't affected by one type of mould, fungus or bacteria. I rehabilitated about 10M3 of oil contaminated soil a few years ago by growing bacteria in it.

    Mouldy Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  11. #11
    Join Date
    Dec 2005
    Location
    Oz
    Posts
    0

    Default

    Quote Originally Posted by Cliff Rogers
    I wouldn't bet on that....
    There is a mould that will eat the ferric oxide coating on recording media; video & audio tape & floppy disks.
    There is also a mould that will eat diesel fuel. :confused:
    I think you're talking about bacteria in those cases

  12. #12
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Toolin,
    bacteria in the diesel, but definitely mould on tapes. Had a collection of videos that succumbed to mould when I was living in a house in the rainforest. Thick, white tendrils of mould all over/through/around the tapes. Because it was so moist there, the air was full of mould spores all the time. Had mould grow on a brand new plastic clipboard within a few days of being unwrapped, mould on the walls, musty clothes even though they were freshly washed and to top it off, Enoki mushrooms growing in the grout joins in the bathroom:eek: . Plus a green tree frog living in the toilet bowl which used to freak out the overseas visitors. Nearly had a heart attack one night when I woke to a blood curdling scream around 2 am from the British backpacker who was staying the night.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  13. #13
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    Quote Originally Posted by journeyman Mick
    ........ a green tree frog living in the toilet bowl which used to freak out the overseas visitors. Nearly had a heart attack one night when I woke to a blood curdling scream around 2 am from the British backpacker who was staying the night.

    Mick
    You sure the scream wasn't from the frog --

Similar Threads

  1. Can silicone sealant be layered?
    By Tyro in forum PAINTING, PLASTERING, TILING, DECORATING, etc.
    Replies: 1
    Last Post: 11th July 2006, 09:25 AM
  2. Removing Silicone
    By maglite in forum BATHROOM & TOILET
    Replies: 6
    Last Post: 19th December 2005, 11:42 AM
  3. child proof containers.
    By jackiew in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 8
    Last Post: 7th October 2004, 10:24 AM
  4. Proof
    By Christopha in forum JOKES
    Replies: 0
    Last Post: 23rd August 2004, 10:09 PM
  5. storing silicone sealant
    By WISE in forum GENERAL ODDS N SODS
    Replies: 13
    Last Post: 4th July 2004, 06:21 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •