Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: Checking Out

  1. #1
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    63
    Posts
    189

    Default Checking Out

    Just bought some material for a project at a hardware store and had an interesting experience at the register.

    When buying timber, long lengths I put on the car and make a note of the item number, description and number of pieces for when paying. Other items I just take to the register.

    When I had everything that time allowed me to buy I went to an available register to pay.
    First the nuts and bolts - four of one size, eight of another. Also twelve washers. The bolts were no problem, they were marked with a code, the washers however did not have a code. The book at the register did not have the exact item so the operator went and got the price off the shelf. There was no price on the shelf - "That's fine with me", I said. The operator thought for a moment and said "s***ff it" and moved onto the timber.
    The treated pine - no problems as I had the code, however the Merbau decking became a headache. I did not see a code when picking the lengths and the operators book just happened to be missing the relevant page. His marvellous register took ages to find the right code all the while other people are asking for help or wanting to pay too.

    At last I could pay for the gear, tie the timber down and go home.
    On reaching home and after unloading I studied the receipt and noticed that where I had eight bolts, I had only been charged for one.

    I should mention that all this happened after 5 on a Friday.

    And here is an image of the finished project.
    Attached Images Attached Images

  2. #2
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Exclamation

    Washers!!!!!!!!!!!!!!!!!

    At Bunnies the 16mm washers are 30cents each and the 6mm washers are 22cents each, gal that is.

    Cheaper to drill holes in coins!!!!!!!!!!!

  3. #3
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    63
    Posts
    189

    Default

    Quote Originally Posted by Handyjack View Post


    On reaching home and after unloading I studied the receipt and noticed that where I had eight bolts, I had only been charged for one.

    And here is an image of the finished project.
    ...and after finishing the project, of the eight bolts I had four left over. I will need to keep them for the next project as the receipt shows only one.

    ps the client loved the finished project.

  4. #4
    Join Date
    Sep 2010
    Location
    Sydney
    Posts
    267

    Default

    You can return items at the big green shed for a credit without a receipt.
    just sayin...

  5. #5
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    Handyjack

    When I saw this thread I immediately thought

    "Oh s**t."

    but I was wrong as I had the words of Hotel California in my head:

    "You can check out any time you like, but you cain't never leave."

    But all's well, and inadvertently, a good purchase.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  6. #6
    Join Date
    May 2004
    Location
    Sunshine Coast Queensland
    Age
    54
    Posts
    0

    Default

    I remember years ago buying a 2 tables at Ikea - the way it works is you select your top and legs seperately.
    I get to the checkout and put the small stuff on the counter leaving the big stuff on the trolley.
    2 tables equals 8 legs, I put one on the counter and when he got to it I pointed to the trolley and said "there's 8 of them mate" - he acknowledged what I said and even looked at the legs on the trolley.
    As I leave I'm tallying the bill (I don't keep a written track but a rough idea in my head of what I've spent) and thinking something doesn't add up.
    Yep - 7 table legs at $7.50 each for free.
    What am I supposed to do, scan the stuff myself.

  7. #7
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by Handyjack View Post
    His marvellous register took ages to find the right code all the while other people are asking for help or wanting to pay too.
    .
    I just got back from walking out of Bunnings in disgust.

    The queues were 10 deep and they only had 2 registers open (no self check out at this one) spying the service counter only has 2 people waiting I ran over to join that queue but that proved a mistake. The first customer was in dispute with the sales attendant. After a few minute the sales assistant called someone on the phone and had a lengthy discussion. Queues are now 12 deep and growing. You know how you look across and see where you would have been if you had stayed on the old queue?
    FInally the guy with the dispute is moved aside, next customer moves into line. He had some timber that didn't scan so sales attendant punches in the number manually, no good, again, no good, again - no good, get the book out, finally a price, but now there is a dispute over the price, then the size, attendant gets out tape measure - the book seems correct, customer says it was on a rack marked X, calls over the PA for assistance at register X, yadda, yadda, drivel . . . . . etc

    I just walked out.

  8. #8
    Join Date
    May 2004
    Location
    Sunshine Coast Queensland
    Age
    54
    Posts
    0

    Default

    I've been using Masters lately and the customer service (at least at the one I use) is incomparible to Bunnings.
    I remember being in Bunnings one time wanting among other things a certain size drill bit. None left so I called a staffer over to be told "if it's not on the shelf we don't have it".
    She walked off, I happened to look up to the top where they keep excess stock and saw a box of what I wanted.
    So I walked up to the counter where she was, dumped the $200 worth of stuff I'd already picked up and told her about the box up top - then I walked out.

    Then again it's not just Bunnings, we refer to our local Mitre10 as a Mitre5 because it only ever has half of what you want.

  9. #9
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    168

    Default

    Masters at Maitland on Sun morn looking for a good strong garden fork. Asked a young thing if he knew about garden forks and was looking for a decent one to buy. "Yep I know all about them", When I asked him what the fork was made of he said 'metal'. So being correct as it was metal, I asked what type, stainless or mild steel. By the blank look I could tell he thought all metals is metals!!

    So se;lected the best of the bunch and a few other essentials and headed for checkout. All self service!
    Struggled with the scanning and paying with the card. Got home and found that I'd apparently only scanned one of the multiple items, eg 4 bolts = 1 bolt scanned, even though you could see that the receipt had 1 bolt @ 15c x 4 but came to 15 cents???
    I even had another couple trying to help, but no staff came to assist.
    Wonder how I'd have gone for 'shoplifting'?

  10. #10
    Join Date
    May 2004
    Location
    Sunshine Coast Queensland
    Age
    54
    Posts
    0

    Default

    I have never had a problem with the auto check out, Morayfield Masters always has at least one staffer close by to help if it's needed - but at the end of the day, every store will be different. People are individuals, and as such the service is going to vary, if the service is seriously bad or a staffer is rude, you take it to a manager.

    When I go in to Masters or (if I'm desperate) Bunnings the only help I ask for is the location of an item - and sometimes not even that since being a fat sod and needing exercise I'm quite content to walk around for 15 or 20 minutes.
    If you want to pay as little as possible you go to Bunnings or Masters and accept the crap service.
    If you need help or advice you go to your local hardware and pay a little more.

  11. #11
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Back to a different Bunnings this afternoon.

    This time I'm wearing my overalls and steel caps and have a layer of sawdust on me from a spot of milling - that must make me look like I know something. Young bloke in the bolt section asks me a question about bolts, says he hasn't been able to find anyone to help him. Get to the checkout and the guy ahead of me on the queue asks the register assistant about drill bits, she doesn't know jack - so I offer an answer, he's very happy and back he heads into the store. Next I go through and then while picking up my bits the guy behind me asks if the store sells chainsaw bar oil, checkout says "Dunno", so I said "Yes you do" and walked off.

  12. #12
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    510

    Default

    Walk into local timber yard, owner deep in conversation with customer regarding durability of certain timbers. Says owner to customer,"Here's the bloke you need to talk to, he's been ruining trees for years."

  13. #13
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    63
    Posts
    189

    Default

    Bought a few items, again on Friday afternoon; chrome tube rail (1200 long), pillars for rail, box of screws and two pieces of timber 1800 long.
    The box of screws were half price $5.01, (marked down) but despite me putting the timber on the counter it did not appear on the receipt.

    No wonder stores have shrinkage. Staff can not see the items in front of them.

    Earlier in the week at a small hard ware store I picked up 8 anka bolts worth about $2 each. Person at the check out charged me for hex head bolts at $0.43. I had told her they were expensive.

    Now I am not trying to hide things but if it works in my favour should I bring it to their attention?

  14. #14
    Join Date
    May 2004
    Location
    Sunshine Coast Queensland
    Age
    54
    Posts
    0

    Default

    This is a major ethical question - is it theft if they decline to charge you for an item.
    I know if they tried to charge me with theft I'd be screaming blue murder for the staffer to get done as an accomplice.

  15. #15
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    I took a small inject HP printer in to get repaired and they said it would take a week but it took a lot longer and many phone calls to get any action. It turns out they had lost my printer and they said we'll replace it with a refurbished printer with a 3 month warrantee. Fine with me so I went and picked it up. A week or so later they called to say "your printer was ready for collection" - presumably it was our original printer - so I went in a got that one as well. There has to be some tax on stupidity or failure of systems to adequately check what is going on - doesn't seem to help much.

Similar Threads

  1. Checking Out
    By Rodgera in forum JOKES
    Replies: 1
    Last Post: 4th March 2012, 10:47 AM
  2. Checking in
    By WoodWrite in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 4
    Last Post: 29th September 2008, 01:51 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •