Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2004
    Location
    Rushworth, Victoria
    Posts
    63

    Default Pressure pump cycling more often

    Hi, we have one of those pumps with a pressure switch on top that supplies the house water from tanks. It has started cutting in a lot more often like there’s a leak somewhere but we can’t find any leaks, no dripping taps etc.

    Could it be the pressure switch is on the way out? I think the unit is about 7 years old. It did have a period of sitting idle for a year at one stage too.

    Any ideas?
    "World's oldest kid"

  2. #2
    Join Date
    Apr 2014
    Location
    Little River
    Age
    78
    Posts
    225

    Default

    In the pressure switch between the pressure switch mechanism and the pump there is a non return valve.

    This valve may be leaking due to some dirt being trapped and it will cause the pressure to drop and the pump run to build it back up.

    If you can't pull it apart to clean the valve you can install a new one between the pump and switch.

  3. #3
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default

    You've probably checked the air pressure in the reservoir bladder?

  4. #4
    Join Date
    Dec 2004
    Location
    Rushworth, Victoria
    Posts
    63

    Default

    This is at the neighbours house.


    Bohdan, thanks for that. Electricity is off here today so it’s a bit hard. I’m going to turn off dunny tap cos sometimes they leak without being visible but you’ve given me something else to check , thanks.

    Aldav, it’s one of the ones with what looks like an electronic business on top, didn’t think they had air in them? I remember the ones that had a big sorta basketball sized reservoir on top, it’s not one of them.
    "World's oldest kid"

  5. #5
    Join Date
    Dec 2004
    Location
    Rushworth, Victoria
    Posts
    63

    Default

    Eventually found problem….. leaking pipe under house in the ground.
    "World's oldest kid"

Similar Threads

  1. pressure pump question please
    By masterblaster in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 4
    Last Post: 21st August 2006, 10:21 PM
  2. Pressure Pump - pressure switch setting?
    By Woody Allan in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 4
    Last Post: 4th January 2006, 04:12 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •