Oak veneer speaker cabinets

[Dart77]

Hello, I have some vintage Infinity speakers as shown. They have oak veener cabinets. Parts of the wood are a little faded and stained (eg beverage cup ring stain) and I'm wondering the best course of action to bring it back again. I was thinking of lightly sanding (?) and then using something on the wood. But not sure what? Maybe some sort of rubbing wood oil. I don't have any experience in wood so if you have any helpful advice it would be appreciated .

Thanks

[Dart77]

71 views of this question and no-one has any idea? Wakey Wakey, are you all clueless?? Such a simple question, Hahaha, what sort of useless forum is this? First and last post, delete me forever ---------------

[Dart77]

No wonder all posts have to go though the moderator first, probably because there is so much abuse from frustrated people who haven't got answers !!!

[Darklord]

More of an upkeep problem than finishing. Try ubeauts Polish Reviver if the surface has a sound coating on it. That stuff works a treat but if the marks appear to be through the surface and in the timber you might need to strip the old finish and start from scratch.

Darky

[soundman]

They don't look too bad.

Unless the surface is roughened, I would not be sanding.

It my be just a simple coat of wax and a good stiff rub will work wonders.

The U beaut traditional wax in natural would be the go.
plenty of, rub it in hard with a bit of rough cloth like a polo shirt and buff of with a soft cloth like t shirt or if you can get it fat ladies cotton panties ( the best polishing cloth known to man).

You will beed a brush for the moulded sections.....a new shoe brush should do the trick.

A bit of wax and bit of elbow grease should do the trick.

cheers