Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2014
    Location
    Bne
    Posts
    35

    Default Question regarding Pre Cat Laquer and HVLP Turbine

    Hi everyone, I have just paid for but not yet delivered a Fuji 5 stage Turbine HVLP.
    I have a number of records to do in Poly of a few projects and then I am moving over to a Pre Cat Lacquer for a shorter dry time and a more durable finish than NC.
    Can I leave the gun for half an hour or so still with the Pre Cat in the cup (none bleeder) or do I have to clean the gun after every coat?
    Thanks in advance

  2. #2
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    287

    Default

    I can't comment specifically on the HVLP gun, but I sprayed my guitar with Mirotone pre-cat through a standard gravity feed gun and didn't clean the gun between coats. From memory it was 10 minutes between coats.

  3. #3
    Join Date
    Feb 2014
    Location
    Bne
    Posts
    35

    Default

    Thanks Jack

Similar Threads

  1. HVLP Turbine Recommendations needed.
    By joez in forum FINISHING
    Replies: 3
    Last Post: 27th March 2012, 10:26 AM
  2. What Laquer should I use
    By Dannys in forum FINISHING
    Replies: 3
    Last Post: 24th November 2010, 12:41 AM
  3. Wind Turbine / Generator...Anyone building / built one??
    By ptrott in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 16
    Last Post: 19th April 2008, 06:11 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •