Results 1 to 15 of 15
  1. #1
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default Tip - Removing pencil from white melamine

    For anybody who is looking at removing pencil from white melamine I have found that Glitz Power Paste works a treat.

    I tried a number of different things but found that the Glitz was the best by a long shot. Just wipe a little paste on with a soft cloth and the pencil is gone. No scrubbing required, just a wipe.

    I think I may have purchased it from Bunnings. Photos are likely upside down thanks to Apple thinking it knows best!



    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  2. #2
    Join Date
    Jun 2012
    Location
    Dungog
    Posts
    55

    Default

    Thanks for tip.

  3. #3
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    160

    Default

    Have you tried those little white “magic sponge” cleaning thingies? They’re my de-graphiting implements of choice.
    Nothing succeeds like a budgie without a beak.

  4. #4
    rrich Guest

    Default

    DUNNO Mates.

    I use lacquer thinner. It seems to get underneath the graphite/wax and sort of float the pencil off. I've noticed that finishes like Watco and MinWax Antique Oil Finish seem to lift pencil off of white oak. I made some not squares for marking hand cutting dove tails and wanted the angle on after I finished the not squares. The MAOF floated the pencil out of the white oak.

  5. #5
    Join Date
    May 2019
    Location
    Adelaide
    Age
    64
    Posts
    23

    Default

    Wd40, spray, wipe off, wipe down with soapy rag to remove wd40. Done.

  6. #6
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    Glad to here that there are some other options. I just tried what I had at hand before coming across the one mentioned.

    Some of the failed that I can remember included:
    Metho
    Terps
    Eraser
    Shelite
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  7. #7
    Join Date
    Apr 2008
    Location
    Currumbin Valley, Qld
    Posts
    3

    Default Cleaning pencil from melamine

    I have also used "Gumption Paste" - can buy from Woolworths, works well.

    Cheers

  8. #8
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    108

    Default

    Turps always worked just fine for me

  9. #9
    Join Date
    Oct 2019
    Location
    Adelaide, South Australia
    Age
    72
    Posts
    3

    Default

    I have always used just a regular eraser.
    Just do it, and have fun

  10. #10
    Join Date
    May 2009
    Location
    Coffs Coast
    Posts
    14

    Default

    Yes, I use an eraser too.

  11. #11
    Join Date
    Jul 2013
    Location
    Lower Blue Mountains
    Posts
    0

    Default

    Jiff cream cleaner

  12. #12
    Join Date
    Aug 2012
    Location
    Imbil
    Posts
    0

    Default

    Having been cabinetmaking for 40 odd years and a considerable of those in white board kitchens. As said by others there are many methods that work, most often you use what is at hand so here is another one a dot of no more gaps on a wet cloth does it with ease, always have some on the job when fitting and working white board.
    Regards Rod.
    Rod Gilbert.

  13. #13
    Join Date
    Jan 2021
    Location
    Melbourne
    Posts
    0

    Default

    Kneadable erasers and blu tak are other effective solutions.

  14. #14
    Join Date
    Oct 2020
    Location
    Blackalls Park NSW 2283
    Age
    77
    Posts
    7

    Default White Vinegar

    I find white vinegar cleans most and is non toxic.

  15. #15
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    Only ever used metho, especially on wood as rubbing with an eraser appears to change the area where the eraser was used, ie when using a spirt stain it absorbs differently.

    Should you have pressed too hard (particularly with soft timber like pine) and have a lined dent use a damp rag and a hot iron to steam the dents out, you will need to do a light sand after this as the dent is swelled out and will probably be slightly proud of the surface. When done the area stains the same as the rest.
    Regards,
    Bob

    Absence of evidence is not evidence of absence.

Similar Threads

  1. Ceramic tiles glue to white melamine?
    By tameriska in forum TILING
    Replies: 2
    Last Post: 19th August 2006, 12:13 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •