![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: Hello from Sydney
-
2nd September 2014, 03:07 PM #1
New Member
- Join Date
- Sep 2014
- Location
- Sydney
- Posts
- 2
Hello from Sydney
Hi I am a lot more comfortable with a computer than I am with a saw table as I have learnt recently by losing skin from my fingertips. It could have been a lot worse and all is now good. I have recently been designing some new chairs for my house which I call Jonah - belly of a whale anyone? I did the design on the computer and had them cut by CNC from a sheet of Marine plywood. The plywood which I asked for (AA) and had delivered to the CNC service turned out to be only A quality and I had a lot of tear out from the bottom side of the cut. Spent ages sanding, grain filling and generally repairing the edge tear out with epoxy. Lesson learned make sure you see the materials you want to use before sending them out. The chair has turned out to be surprisingly comfortable and I am having it sprayed in a couple of coats of automotive clear to finish it. I need 8 chairs for outside and I think they will be probably be made out of Bamboo plywood for durability. I have heard that Bamboo ply also has problems when being cut a CNC machine. I have done a design for a more upright dining chair without arm rests and a matching table. I am going to make a Bamboo plywood prototype of the dining chair next to see how that turns out. Assembling the chair was fun and a bit like doing a Japanese wood puzzle. The rods holding all the pieces in place are carbon fibre as I did not know how strong the overall chair edges would be until I had one built one. Easily holds 120kg with negligible flex so thats another surprisingly good under engineered result. As you can see the facilities are a bit limited but that doesn't limit the imagination.
Best
Brendan
-
2nd September 2014, 05:22 PM #2
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Brendan nice chairs.
-
2nd September 2014, 05:51 PM #3
G'Day & Welcome to a top forum "Brendan".
There are a heap of members in Sydney and surrounding areas.....
Some of us have gathered at one of the forum members home at Katoomba about 4 times for a meet & greet.
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
That chair is beautiful and deserves it's own thread were you'll have more people to view and maybe off assistance if needed.
You could try putting in the "cnc machinery" section along with "general woodwork" for a start...keep up the photos and the good work...
Enjoy the forum.
Enjoy your woodwork..
Cheers crowie
-
2nd September 2014, 07:15 PM #4
Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 122
Unreal.
I love the way some burst onto the scene! HERE IT IS! tra-da! and wow. Its a great design, creatively done and highly reproducible. So many (i.e. me) struggle to get even one of these right.
-
3rd September 2014, 05:13 PM #5
Welcome to the forum.
Nice work on the chair. Hope your injury was not limiting to your functional ability.
-
3rd September 2014, 06:51 PM #6
New Member
- Join Date
- Sep 2014
- Location
- Sydney
- Posts
- 2
Restricted my laughable guitar playing for a few weeks and had my kids going Oh Yuk. Have fully recovered and regenerated. Have to say I was lucky and its not as easy or as simple as the Youtube videos. Thanks for all the kinds words generally. Its always nice to get a pat on the back from people who know what they are doing. I don't know whether this image is widely available on this site but it was a big help to me in determining all the dimensions for my first chair. It comes from this article:
http://www.woodmagazine.com/woodwork...table-seating/
-
7th September 2014, 12:07 AM #7
Brendan,
G'Day and welcome to the forums, EnjoyLove the look of those chairs too
Cheers
Tony.
-
11th October 2014, 10:22 AM #8
Local Sydney area Katoomba Get Together on 2nd November
Similar Threads
-
Hello from Sydney
By john72 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 11th October 2014, 10:18 AM -
Another where is this in Sydney
By munruben in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 4Last Post: 31st March 2011, 09:51 AM -
G'day from Sydney
By samhill57 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 1st August 2009, 10:36 PM -
Hi from Sydney
By Saulei in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 13th July 2009, 11:42 PM