![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
4th April 2024, 09:48 AM #1
Sharpening Drill Bits - Michael Fortune
FineWoodWorking Magazine has an interesting video by Michael Fortune on sharpening drill bits.
Sharpen Your Own Hybrid Drill Bits - FineWoodworking
Has anyone tried his technique? Comments?
-
4th April 2024, 10:39 AM #2
SENIOR MEMBER
- Join Date
- Oct 2010
- Location
- NSW
- Posts
- 513
Yes Graeme, I've done that when I haven't had the right size brad point to hand. It's not easy to do on the smaller sizes but if you have some hand grinding experience, it's fairly easy on anything over about 8mm. Those with young eyes might be able to go even smaller.