![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
-
10th April 2013, 12:30 PM #1
The Russel Coyte of Woodworking
- Join Date
- Mar 2009
- Location
- Brisbane, Australia
- Age
- 52
- Posts
- 147
Can someone with a CNC machine help me with a project?
A very dear friend of mine is turning 60, he lives in the US and is an ex Harbour Patrol Captain in the US coast guard. He and his retired buddies carry on like teenages in their modified boats up and down the coast.
I am planning to make him a nice "Captains Box" and I would like the following words carved into the top.
1st option - Captain Jeffrey Chamberlain
2nd Option - Point Arguello Yacht Club
either way I would thing that someone with a CNC machine should be able to whip this up in a jiffy.
Can anyone offer their services I am happy to fling them a few bucks. I would make the box then send you the lid?
Cheers Bryan
-
10th April 2013, 01:33 PM #2
Size of box/lid please
Would have to be carved before lid is assembledEvery day is better than yesterday
Cheers
SAISAY
-
10th April 2013, 05:25 PM #3
The Russel Coyte of Woodworking
- Join Date
- Mar 2009
- Location
- Brisbane, Australia
- Age
- 52
- Posts
- 147
Hi Saisay
Ummm roughly 300mm x 200mm, at this stage I have only done a rough scetch but is that too small for your machine?
I am thinking Jarah for the lid.
Cheers
Bryan
-
10th April 2013, 11:47 PM #4
Bryan,
Anythings possible. Do you have a particular font in mind ? and what size would you like the font ?
Cheers
Tony.
Image 1 (2).jpg Image 2 (2).jpg
-
11th April 2013, 10:14 AM #5
The Russel Coyte of Woodworking
- Join Date
- Mar 2009
- Location
- Brisbane, Australia
- Age
- 52
- Posts
- 147
Jeeeez Louise!!
That looks awwweeeesssssome!!!
I would be happy with both!
Could you do this and would it work? its Blackletter686 BT in a Word document.
Let me know
-
11th April 2013, 10:40 AM #6
I am very glad you stepped in Tony
You a bit closer to Bryan than I am in Tully HeadsEvery day is better than yesterday
Cheers
SAISAY
-
11th April 2013, 07:10 PM #7
Hi,
No probs SaiSay.
I should be able to assist Bryan, I am a little time poor but I am sure I can squeeze it in for you somewhere
The images I have posted are set to the actual size of 300mm x 200mm and the attached images are now in the font Blackletter686 BT.
All you have to do now is advise the size of the font in relation to the lid size then we can go from there
Cheers
Tony.
Image 4.jpg Image 3.jpg
-
11th April 2013, 07:22 PM #8
Member
- Join Date
- Jan 2012
- Location
- Springfield Lakes
- Posts
- 44
Last edited by Smirkin; 11th April 2013 at 07:26 PM. Reason: Duplicated an earlier post