Results 1 to 2 of 2
  1. #1
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default Brush coats nder spray lacquer

    After a fair bit of experimentation,and a lot of advice from people on this forum, Im now doing a reasonable job of spraying lacquer. What I've settled on is one coat of Wattyl Rediseal (thinned 50/50), sand back, followed by 2 coats of Wattyl Stylwood (thinned 20/80, followed by straight).
    Now i'm happy with the process I have come to the conclusion that the final result is not as nice as brush-applied finishes. Its like the timber has lost its inner beauty, its natural glow. I'm tentatively thinking that this is beause the spray finish sits on top of the wood, rather then penetrating deep into it like would happen under the scrubbing motion of a brush or WOP - hence loosing any 3d effect.

    Do others notice this? How do you get around it ?

    Cheers
    Arron
    Apologies for unnoticed autocomplete errors.

  2. #2
    Join Date
    Apr 2008
    Location
    Lalla, Tasmania
    Posts
    0

    Default

    How do you apply it by brush, do you thin it down also? I've often brushed on and sanded a couple of coats and then sprayed to get a nice finish but never really done a comparison. I would have thought the first coat would have penetrated into the wood.

    SB
    Power corrupts, absolute power means we can run a hell of alot of power tools

Similar Threads

  1. Lemon oil and spray lacquer brands
    By clarence1 in forum FINISHING
    Replies: 1
    Last Post: 13th July 2008, 10:46 PM
  2. spray lacquer-how many coats?
    By spring in forum FINISHING
    Replies: 8
    Last Post: 19th July 2007, 06:40 PM
  3. Shellac, maple harp, spray lacquer HELP!
    By RichardL in forum FINISHING
    Replies: 12
    Last Post: 4th October 2005, 02:15 PM
  4. Steel Wool / Scouring Pads between coats of lacquer
    By Richardwoodhead in forum FINISHING
    Replies: 2
    Last Post: 12th September 2005, 07:37 AM
  5. Sanding between coats of lacquer
    By Richardwoodhead in forum FINISHING
    Replies: 12
    Last Post: 9th September 2005, 02:23 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •