Results 1 to 4 of 4

Thread: Spa Power

  1. 21st June 2007, 12:32 AM #1
    mnorman007
    mnorman007 is offline Hack
    Join Date
    Aug 2006
    Location
    Perth, WA
    Posts
    38

    Default Spa Power

    Hey guys,
    Ive got a bit of an odd situation here... I bought a spa second hand and Ive hooked it all up to my old pool circuit but the spa heater doesnt have a plug on the end.
    According to the manual it is single phase but says that it is 25amps. The highest plug Ive found is a 15amp and it just doesnt seem to add up to me. The wires are the the flat twin and earth cables which also dont fit a standard plug.
    Is it just that its late at night and I cant think properly, or does something not add up?
    Cheers,
    M.
  2. 21st June 2007, 08:10 AM #2
    cross
    cross is offline Member
    Join Date
    Aug 2006
    Location
    Australia
    Posts
    66

    Default

    Possibly the spa was originally hard wired into an isolation switch?
    I accept no liability or responsibility for advice offered by myself regarding Electrical or Airconditioning related questions. I strongly advise contacting a Licensed Tradeperson for all work of this nature.
  3. 21st June 2007, 12:27 PM #3
    SilentButDeadly's Avatar
    SilentButDeadly
    SilentButDeadly is offline Sawdust abuser
    Join Date
    Sep 2006
    Location
    Behind that little door under the thicknesser...
    Posts
    44

    Default

    Yep.........it'll have been hardwired into a 25amp circuit.....just like your average electric oven. Time to call a sparky!!
    Ours is not to reason why.....only to point and giggle.
  4. 23rd June 2007, 01:48 AM #4
    mnorman007
    mnorman007 is offline Hack
    Join Date
    Aug 2006
    Location
    Perth, WA
    Posts
    38

    Default

    Thanks guys. Was pretty sure that was the case but was kinda hoping there was something simpler. Ive got a leccy coming out next week... lookin forward to finally gettin into the spa!
    Cheers
    m
« Previous Thread | Next Thread »

Similar Threads

  1. Power and insulation to the new shed
    By har616 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 14
    Last Post: 15th January 2007, 11:54 PM
  2. Spa in hob has movement
    By Carlos in forum KITCHENS, BATHROOMS, THEATRES, etc
    Replies: 1
    Last Post: 16th July 2006, 11:47 PM
  3. power point wiring
    By ariel in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 44
    Last Post: 27th May 2006, 09:12 AM
  4. What do you do with power tool cords
    By NewLou in forum POLLS
    Replies: 21
    Last Post: 22nd March 2005, 04:41 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules