Results 1 to 5 of 5
Thread: Cleaning spraygun
-
11th December 2005, 02:22 PM #1
SENIOR MEMBER
- Join Date
- Feb 2003
- Location
- Garvoc VIC AUSTRALIA
- Posts
- 3,208
Cleaning spraygun
I have an old spraygun that was probably put away dirty by a previous owner.
I can't screw the pot off so I think I need to soak it something to loosen things up.
Any suggestions what to use.
-
11th December 2005, 02:44 PM #2
GOLD MEMBER
- Join Date
- May 2003
- Location
- Kuranda, paradise, North Qld
- Age
- 63
- Posts
- 2,026
Bob,
if you're lucky it was nitrocellulose lacquer that was left in the pot. Soaking it in thinners will loosen it. If it's pretty much anything else it's probably stuck on permanently
.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
11th December 2005, 04:09 PM #3
......say what?
- Join Date
- Feb 2005
- Location
- Melbourne, Australia
- Age
- 47
- Posts
- 0
try and jam some paint stripper in there
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
11th December 2005, 05:41 PM #4
SENIOR MEMBER
- Join Date
- Nov 2004
- Location
- Port Pirie SA
- Age
- 52
- Posts
- 0
Is it a plastic or metal pot?
A metal pot may be able to be heated to soften the paint. Can you unscrew the pot's outlet riser from the gun handle?....................................................................
-
19th December 2005, 11:41 PM #5
GOLD MEMBER
- Join Date
- Apr 2002
- Location
- Brisbane
- Posts
- 0
A long swim in thinners shifts most things.
well at least softens them.
Using the gun to apply sprayable contact cement also shifts lots of stuff.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
Reply With Quote
Similar Threads
-
roofing / cleaning /repairs
By dzcook in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 2Last Post: 21st June 2005, 11:18 PM -
HVLP Conversion Spraygun
By Justin in forum FINISHINGReplies: 2Last Post: 24th September 2003, 11:08 PM
Bookmarks