![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
21st November 2010, 02:20 PM #1
Putting doors into a hallway- Help!
G'day- Nooby here....
Not completely green when it comes to hanging doors but could do with a little advice..
To zone a room for air-con I'm putting double doors into a hallway. The door's are a good fit for the width of the hall, leaving a space on each side to be filled with the King & Jack studs. There has to be a trick to cleanly and neatly removing the sections of skirting board and cornice for the King stud? Any idea's and/or advice whould be greatly appreciated.
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
Removing Hallway Archways
By Cornuto in forum PLASTERINGReplies: 3Last Post: 12th April 2007, 02:33 PM