![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Mixing fence materials
-
11th September 2016, 03:30 PM #1
Mixing fence materials
Hi
I'm planning on putting up a front fence and considering to use mixed materials. My current plan is, for every two panels of colour bond, there will be a narrow timber section. Something like below:
mISmF4s.png
Will there be issues with this sort of design? Should the Colourbond and timber posts be glued together when setting them in?
Any thought appreciated.
Attached Images
-
mISmF4s.png (199.0 KB)
Read the full thread at RenovateForum.com...
-
Similar Threads
-
Mixing Finishes??
By shanesmith80 in forum FINISHINGReplies: 2Last Post: 4th April 2016, 08:16 PM -
U'Beaut Dye Mixing
By Glenn.Visca in forum FINISHINGReplies: 6Last Post: 13th October 2015, 06:03 PM -
Mixing woodstains?
By matthewl in forum FINISHINGReplies: 4Last Post: 3rd June 2007, 05:52 PM