Results 1 to 6 of 6
  1. #1
    Join Date
    Sep 2014
    Location
    Washington
    Posts
    3

    Default Using a dry log cut

    I'm an amateur woodworker and am attempting to make a table (like the table shown) out of a log cut that is about 3 inches thick. I took it to my grandpa who has been woodworking for many years and he said that it doesn't have enough moisture to use. If I were to use it, it would crack more than it has. Can anyone tell me how (if at all possible) I can add moisture to it? Oil maybe? Or if I would even need to moisten it. Or if it's beyond saving. Also, how I would seal it for outside use. Lacquer? Thanks.
    IMG_1170.jpg IMG_1323.jpg

  2. #2
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    0

    Default

    What will it be? A table or a stool? Wood cracks = that is a fact of life. That piece has one crack. Suppose it had 5?
    By taping up the bottom and side, you might fill the void with epoxy mixed with brass key-cutter filings from the local hardware store.
    Might as well turn a flaw into a feature, yes?

    Outdoors, the weather is far more aggressive than any finish invented.
    Sikkens Cetol is the very best of the lot but expensive and not available
    in small quantities (total log house size = yes).
    Why the Hello bother? Let it weather, it will outlast you and gain
    some of the character that I lack in the process.

    I live at 53N in the mountains. I've got 10 western red cedar carvings outdoors in the WX.
    I like to watch them weather, nothing is anywhere near turning into rot and dust yet.
    Black house paint or a couple of coats of Varathane satin. Good enough for me.

  3. #3
    Join Date
    Aug 2004
    Location
    Perth WA
    Posts
    355

    Default

    Can you get a clamp/s on it to close the gap? If so then get a glue into the gap, clamp it up and then drill two holes diagonally in opposite directions in the side, one either side of the joint and one above the other then glue and insert two dowels and let set for a week. Could work or creat a new split else where.
    Experienced in removing the tree from the furniture

  4. #4
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by rod1949 View Post
    Can you get a clamp/s on it to close the gap? If so then get a glue into the gap, clamp it up and then drill two holes diagonally in opposite directions in the side, one either side of the joint and one above the other then glue and insert two dowels and let set for a week. Could work or creat a new split else where.
    I'll take a bet on the "split elsewhere" especially if it is clamped. 3" of thickness will take about 3 summers to dry so I'd recommend not clamping it and putting it in a cool (not totally dry place - like under a house) and wait until after the 3 summers and it is still in one piece and then put dowels through any splits.

    As far as adding moisture to it, oil is not water an it won't close the crack. Dry wood is more that just green wood without the water. As it dries the wood cells shrink differently in different directions and there is not much chance of getting back all the dimensional changes. All that oil do is filll cavities but it won't make the wood cells swell back to their original size

  5. #5
    Join Date
    Sep 2014
    Location
    Washington
    Posts
    3

    Default

    Well at this point I realize that the cut has a split in it and I don't really want to take it away. After all, I was going for a more rugged and weathered look in my table. It might help its character. Could anyone tell me how I would go about sealing it for outdoor use?

  6. #6
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    If it was me and depending on how often I want to refinish I would either use Danish oil or a poly based finish with UV resistance.

    If I choose the oil means I have to apply more often.

    Normally when wood is exposed to the weather the other layer will eventually go grey. It is just a matter of when and what will be needed to look after the piece to make it last as long as possible.

    I think the project you have embarked on is going to be a fun one to make. Personally I would seal the crack with epoxy, either clear or dyed. Mainly to stop little critters making it a home.

    Good luck and do post photos when finish.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •