![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Trenching...and then not :/
-
12th April 2020, 07:15 PM #1
GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Trenching...and then not :/
I needed to cut several meters of T-slot for the new bench, so I cobbled up a trenching jig for my router. I like fe$tool, and accept that I'll pay many money for a lot of their tools, but their trenching jig is a staggering $350! For a chunk of acrylic with a few knobs. Crazy.
I didn't have ideal raw materials, and didn't want to venture out into virus-laden world, so made do with stuff lying around. Laminated two 5ml pieces of acrylic, stole some clamp hardware from some china tools, and hacked up a couple of mounting bolts to fit the router base.
Trenching template top.jpg Trenching template front.jpg
I was very pleased with the result - made a few errors: the knobs foul against the dust port on narrow stock (need to lengthen the base), and dust collection is terrible. But it tracked square and straight, and I happily cut around 5 linear meters of slot.
And I finally got to use the Axminster T-slot cutter that I've had lying around for 18 months, waiting for me to get to this stage.
t-slots cut.jpg track clamps.jpg
And just when I was smiling hugely, this happened: with about 3 meters of slot to go...
broken t-slot cutter.jpg broken t-slot cutter top.jpg
Pretty frustrating. Replacement bit would need to come from the UK as I don't know of an equivalent available locally. I usually would't buy the same tool if it failed like this one did, but there don't seem to be alternatives. As the pieces end up as a 4m long run of slot, I need it all to be the same or the clamps will foul.
Bit is out of warranty - even if this sort of thing was covered. It was something I bought a long time back knowing I'd need it for this. Gave it a quick try when it arrived, then stuck it in a box until required. Pretty disappointing. I'd thought of using the dado blade to cut an initial slot, and then use the bit for the final shape - wish I'd gone with that plan now - it'd probably have lasted long enough to finish the job.
-
12th April 2020, 09:41 PM #2
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 1,621
That really gives you the poos eh. With the benifit of hindsight a smaller straight cutting bit to remove the bulk of the material first followed by the T cutter.
Experienced in removing the tree from the furniture
-
12th April 2020, 09:49 PM #3
GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 2,903
Yep, that's a huge ask of a router bit of unknown pedigree. Even with a known high quality bit a first pass with a smaller diameter straight bit is the way to go. If you want to buy quality bits without paying an extraordinary price look for the Arden brand, great quality at a fair price.
-
12th April 2020, 09:59 PM #4
They never used to be common in Aus but have made it over. HERE is a 7/16” one on Amazon
Nothing succeeds like a budgie without a beak.
-
13th April 2020, 02:36 PM #5
GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Well, lesson learned.
The base of the track clamps is a shade under 12mm, so I think the 7/16ths bit will be too tight. Looks like Arden do one that will work. The Axminster bit cuts a 13mm slot.
My dado blade is accurate/adjustable to 1/10th of a mm, so I got it dialled in and cut the remaining channels, and then routed some wider sections to insert the clamps. These should allow me to get the replacement t-slot cutter in and finish the job. At least I can get on with the rest of the build.
829CC042-0E03-44B5-80BD-46A455532822.jpg
-
13th April 2020, 08:24 PM #6
Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 5,906
-
14th April 2020, 10:54 AM #7
GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,744
Dimar tools make several, here’s a photo of the page in their catalogue. Ph: 0295218881
Similar Threads
-
Concrete Saw for Trenching
By garf in forum CONCRETINGReplies: 0Last Post: 10th October 2007, 05:46 PM