![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: DOORS, This is my first post.
-
15th November 2022, 09:42 PM #1
New Member
- Join Date
- Nov 2022
- Location
- Canberra
- Posts
- 1
DOORS, This is my first post.
As architect 664 on the Parliament House project in Canberra I was responsible for the doors & hardware documentation. It ended a promising architectural career as I ended up doing the doors forever. In my spare time i get into a bit of related product design mainly in the area of hinges and the occasional special purpose lock.
-
16th November 2022, 09:14 PM #2
Welcome to the forum.
There are doors and then there are doors. Once you start working on them, be it fitting, repairing, installing locks or tightening loose screw you learn how different doors can be.
-
17th November 2022, 03:47 PM #3G'Day & Welcome to a top forum.....
There are quite a few members in Canberra and around the Southern Highlands with a stack of members in Sydney area plus the rest of the country.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork......
Cheers crowie
-
23rd November 2022, 02:39 PM #4
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 68
- Posts
- 1,570
Welcome to the forum.
-
24th November 2022, 12:14 AM #5
Welcome to the forum
Similar Threads
-
Break in & robbery. Security doors for French doors?
By graham.murfett in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 19Last Post: 7th August 2017, 02:33 PM -
Sliding glass doors and security doors.
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 23rd September 2012, 10:00 PM