Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2008
    Location
    Yarra Ranges
    Age
    57
    Posts
    2

    Default spray on finish?

    I need a little help
    I've just made a rack for a friend
    He makes badges at markets and wanted a rack to hold 47mm dia. circles of paper.

    I've made the rack but now i can't use any finish that needs rubbing because i can't get to most of it!
    It's only sanded to 150 grit, it's gonna be outside but not in direct sun, it's recycled jarrah and spotted gum.....
    any suggestions would be appreciated.

  2. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    My suggestion would be to oil it, any spray on finish will need sanding between coats, if it is going to be in the weather regular oil application will be required, nice looking job by the way.

  3. #3
    Join Date
    Jul 2008
    Location
    Yarra Ranges
    Age
    57
    Posts
    2

    Default

    thanks,
    i didn't think about the finish till it was too late

Similar Threads

  1. water based spray finish
    By wayne's wood in forum FINISHING
    Replies: 0
    Last Post: 21st August 2008, 05:08 PM
  2. spray finish without formaldehyde
    By LeonieB in forum FINISHING
    Replies: 28
    Last Post: 29th January 2008, 12:23 PM
  3. Spray Finish
    By sprog1 in forum FINISHING
    Replies: 11
    Last Post: 7th July 2006, 07:31 PM
  4. Spray finish
    By river rat in forum FINISHING
    Replies: 2
    Last Post: 27th March 2006, 05:44 AM
  5. Spray finish...so many things to consider!
    By buzsaw in forum FINISHING
    Replies: 22
    Last Post: 13th December 2005, 11:19 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •