Thanks: 2
Likes: 2
Needs Pictures: 0
Picture(s) thanks: 1
Results 1 to 15 of 21
-
18th July 2018, 02:43 PM #1New Member
- Join Date
- Jul 2018
- Location
- Carine WA
- Posts
- 2
Incra LS fence/wonder fence, table saw, 2HP dusty, Triton TRA001 router, etc.
I am not going to split this up. You can sell on what you don't need.
I am located in Carine, WA. This is for local pick up only. I can't help with any lifting.
Asking for $950 firm.
After too much back surgery and some plates and screws, I am giving away the woodwork . I have been out of action for about three years and had a bit of water come through the roof so there is some rust on the top of the table saw and the router table has got some water in the chipboard and had some swelling so will need to be replaced (see photos - I've tried to make them as honest as possible). Everything works well and is all less than about six years old - some more recent.
I am selling my set up consisting:
- Carbatech 10" Contractor's Saw on a moveable base. It still works but needs the table cleaned up - see photos. I'll give you the original fence and mitre guide that came with the table. It comes with a full Incra LS32 table saw fence and router table combo (a couple of grand worth of fence and router table? - router table comes with aluminium insert). See here: TS-LS Combo - 1
- Triton TRA001 - barely used. It's mounted in the Incra router table that replaces one of the table saw wings. See here: 2400W Dual Mode Precision Plunge Router | TritonTools.com
- Carbatech dust extractor 2HP - used twice. See here: https://www.carbatec.com.au/dust-con...ld-code-fm-300
- All the documentation for the saw and Incra system - see photos.
- Grr Ripper, feather boards, WhiteSide US made router bits for dovetails (unused) see photos.
- Incra V27 Mitre gauge.
- I've also got some timber for box making that you are welcome to.
Email me if you are keen, local and have the money. Thanks!
Dan
-
18th July 2018, 06:30 PM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 2,903
There's going to be a very happy WA member! Sorry to hear about your health issues, hope you can find something less taxing to capture your interest.
-
18th July 2018, 09:04 PM #3New Member
- Join Date
- Jul 2018
- Location
- Perth
- Posts
- 1
Hi Dan, sent you a private message but not sure if it went through.. If you didn't receive it please message me back.
-
19th July 2018, 03:18 AM #4Intermediate Member
- Join Date
- May 2014
- Location
- brisbane
- Posts
- 42
gday dan
yes i simpathy with about back problems but im still able to get to my shed and do a fair bit of wood work still. i'm interested in buying all of you advertised gear excluding the table saw. I'm in Brisbane but would be prepared to freight gear from you to Brisbane .I'm willing to offer you the $950.00 you are asking for your gear excluding saw bench.
Can you let me know if gear is still available and if my offer is acceptable.
Regards Doug Gordon
my contact number is 0418886643
-
19th July 2018, 02:19 PM #5Intermediate Member
- Join Date
- Aug 2016
- Location
- Ormond
- Age
- 53
- Posts
- 42
Ripping deal for a WA local.
Hope the back gets better soon Dan
-
19th July 2018, 03:24 PM #6Intermediate Member
- Join Date
- May 2014
- Location
- brisbane
- Posts
- 42
dan
doug gordon here ive been advised by woodwork forum that you are trying to contact me.
i have cleared my message box and can now accept new mail.
can you contact me know
DougGordon
-
20th July 2018, 10:38 AM #7Intermediate Member
- Join Date
- May 2014
- Location
- brisbane
- Posts
- 42
Dan its Doug Gordon again dont seem to be able to get a response im still interested in all but the saw bench. i'm particularily keen on the incra sable saw device.
can you advise if all still available
Doug GORDON
-
20th July 2018, 10:46 AM #8Novice
- Join Date
- Feb 2017
- Location
- Perth
- Age
- 68
- Posts
- 12
Hi Dan
I am intersested in all, I am not far away in Landsdale
your phone number please or you can contact me on 0417846217
Many thanks
Keiron
-
21st July 2018, 11:05 AM #9Novice
- Join Date
- Feb 2017
- Location
- Perth
- Age
- 68
- Posts
- 12
Hi Dan
I am waiting to hear from you,I am away to work soon and will be unavailable, If you can not get me by phone
You can get me on
[email protected]
Many thanks
Keiron
-
21st July 2018, 09:43 PM #10Novice
- Join Date
- Feb 2017
- Location
- Perth
- Age
- 68
- Posts
- 12
We are very interested and we live locally. Thenks
-
22nd July 2018, 12:28 PM #11New Member
- Join Date
- Jul 2018
- Location
- Carine WA
- Posts
- 2
The dust extractor, Incra fences, router table wing and router have gone.
I've still got the table saw with cast iron top (surface rust - see pics) and original fences, mitre gauge and cast iron wing that was removed for the router table. It's in WA - Carine. I'm asking $300. I can't reply until Monday.
Cheers
Dan
-
22nd July 2018, 01:41 PM #12Novice
- Join Date
- Feb 2017
- Location
- Perth
- Age
- 68
- Posts
- 12
Hi should have called me you said were not spliting up
i would have taken the lot
cheers
-
22nd July 2018, 05:16 PM #13SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Brisbane
- Posts
- 175
-
22nd July 2018, 05:57 PM #14GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,502
-
23rd July 2018, 11:51 AM #15Novice
- Join Date
- Feb 2017
- Location
- Perth
- Age
- 68
- Posts
- 12
Ian
Whoever you are if you read the thread my number and email address was supplied I had no way of contacting the gentleman selling the goods
I was not contacted about viewing and purchase,
Thank you for your input
Keiron