![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Thicknessing narrow edge
-
30th November 2013, 04:31 PM #1
Thicknessing narrow edge
I've planed and jointed some ~50mmX25mm stock and run the wide edge through the thicknesser. Instead of running the narrow edge through the TS could I just run them through the thicknesser? Most recommendations appear to be ripping the narrow edge on the TS, problem is my TS fence appears to have a bit of a bow vertically!
Thanks,
GarethAnnular Grooved Nails....Ribbed for the Woods Pleasure?
-
30th November 2013, 10:21 PM #2
Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 5,906
Yes you can.
-
5th December 2013, 08:22 PM #3
Worked a treat thanks.
Annular Grooved Nails....Ribbed for the Woods Pleasure?
-
6th December 2013, 10:13 AM #4