Results 1 to 6 of 6
Thread: John Wright
-
10th November 2011, 02:50 PM #1New Member
- Join Date
- Nov 2011
- Location
- Tatura Vic
- Age
- 79
- Posts
- 1
John Wright
G'day I am interested in turning offset burls, offset items in general and also other woodwork including pyrography. The diameter of the burls are mostly about 70cm. Interested to hear if anyone else is also interested in offset turning.
-
10th November 2011, 05:14 PM #2
Welcome to the forum John.
Good to see you are still up and about.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
11th November 2011, 01:11 AM #3
Welcome to the forum
-
11th November 2011, 07:45 PM #4
Welcome to the forum. Might also advisable to post that question in this subforum.
WOODTURNING - GENERAL - Woodwork Forums
-
13th November 2011, 11:33 PM #5
Plenty of guys on the forum will be able to offer you advice on this. welcome aboard
Reality is no background music.
Cheers John
-
14th November 2011, 11:02 PM #6Senior Member
- Join Date
- Apr 2011
- Location
- Pakenham, Victoria
- Age
- 53
- Posts
- 10
Re: John Wright
Hi John
I have no idea about offset turning, but welcome to the forum.
Danny
Similar Threads
-
Everything wright or rong
By rrich in forum JOKESReplies: 0Last Post: 28th March 2008, 05:45 AM
Bookmarks