Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: CARBA-TEC 400mm DRUM SANDER $450
-
6th July 2014, 12:50 PM #1Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 394
CARBA-TEC 400mm DRUM SANDER $450
Carbatec drum sander. A few years old but in fine working order. It is mounted on a timber stand that you can have if you want, and that is sitting on a Carbatec mobile base that is available for $40. There is also a 10meter roll of 80 grit paper and most of a 10 meter roll of 120 grit paper.
Pick up from Springfield on the fabulous NSW central coast.____________________________________________________________
there are only 10 types of people in the world. Those that understand binary arithmetic and those that don't.
-
7th July 2014, 08:00 PM #2Senior Member
- Join Date
- Oct 2013
- Location
- East Ballina
- Posts
- 195
Hi Avery, how heavy is this? Id consider if I could organise freight for the right price. If you could let me know the dimensions and weight ( If it were to go in a square box) that would be great and ill have a look around and consider a bid. Cheers
-
7th July 2014, 11:21 PM #3Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 394
____________________________________________________________
there are only 10 types of people in the world. Those that understand binary arithmetic and those that don't.
-
7th July 2014, 11:26 PM #4Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 394
____________________________________________________________
there are only 10 types of people in the world. Those that understand binary arithmetic and those that don't.
-
8th July 2014, 10:33 AM #5Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 394
I don't know where CarbaTec got their measurements - perhaps the machine is partially disassembled for shipping.
My measurements are:
From the edge of the frame to the end of the motor is 34" (870mm)
From the back of the bed to the front of the control panel is 23" (590mm)
From the bottom of the base to the top of the spindle handle is 23" (590mm)
I wil agree with their 50Kg weight - it is at least that.____________________________________________________________
there are only 10 types of people in the world. Those that understand binary arithmetic and those that don't.