![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: WOODWORKING QUIZ for 1 AUG 04
-
1st August 2004, 09:41 PM #1
WOODWORKING QUIZ for 1 AUG 04
Good Evening Friends,
R13 insulation that is 15" wide and 3 1/2" thick will cover 135 square feet.
How many rolls will it take to cover 2400 square feet?
Respectfully,Ralph Jones Woodworking
London, Ohio
-
1st August 2004, 09:52 PM #2
Just under 18 Rolls
17.777
-
1st August 2004, 10:18 PM #3
As Ivan stated + 10 percent for trim/wastage by experienced installation contractor =19.56 or 20 rolls paid for.
If I do it myself 25-30 packs and 2 full skip bins of waste.
Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
1st August 2004, 10:26 PM #4
BC,
I totaly missed the Quiz of the 31th
Must have been snoozing
Count
-
1st August 2004, 11:06 PM #5
I looked but it confused me (quite common occurence actually) as I thought "hang on there's six parts to a dovetail joint" which was my downfall, took me all day to realise Ralph asked about only the dovetail section, not the pins.
Being the son of an Artisan does not rub off I assure you.Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
2nd August 2004, 09:46 PM #6
WOODWORKING QUIZ ANSWER for 1 Aug 04
Good Evening Friends,
Ivan was correct with his answer of 17.777 rolls, however the lumber yard is not going to sell you a part of a roll so your going to have to buy the full 18 rolls.
Thank you for your support.
Respectfully,Ralph Jones Woodworking
London, Ohio