Thanks Thanks:  2
Likes Likes:  6
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. 18th December 2023, 08:06 PM #1
    derekcohen's Avatar
    derekcohen
    derekcohen is offline Be inspired. Be creative. Be bold.
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    9,037

    Default Bandsaw resaw fence

    The Jan/Feb 2024 (#308) edition of Fine Woodworking magazine (out very soon if not now, I believe) carries a Shop Tip of mine to build a resaw fence.


    I don't usually mention when a shop tip of mine is published (had quite a few over the years), but this one is in time for Christmas. Look out for it.


    Regards from Perth


    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
    Reply With Quote Reply With Quote
  2. 18th December 2023, 09:14 PM #2
    rogerwilco
    rogerwilco is offline Senior Member
    Join Date
    Jul 2010
    Location
    Brunswick VIC
    Age
    42
    Posts
    443

    Default

    Nice timing indeed. Building a high resaw fence for my Hammer N4400 is on my list of shop projects. I was gonna get a big flat piece of something stable, and figure out how to clamp it directly to the cast iron table with clamping blocks that fit between the webbing on the underside of the table.

    Keen to see and learn from your solution, which I know will be much more thoughtful than mine!
    Reply With Quote Reply With Quote
  3. 18th December 2023, 09:30 PM #3
    delbs's Avatar
    delbs
    delbs is offline GOLD MEMBER
    Join Date
    Sep 2012
    Location
    Coffs Harbour
    Posts
    1,518

    Default

    Quote Originally Posted by derekcohen View Post
    The Jan/Feb 2024 (#308) edition of Fine Woodworking magazine (out very soon if not now, I believe) carries a Shop Tip of mine to build a resaw fence.


    I don't usually mention when a shop tip of mine is published (had quite a few over the years), but this one is in time for Christmas. Look out for it.


    Regards from Perth


    Derek
    Congrats Derek I’ll keep an eye out for it. I recently read your article on your website for the fence you made for your n4400 as I’m doing something similar. Keen to see if the article differs from this much

    Cheers
    Nathan
    Reply With Quote Reply With Quote
  4. 19th December 2023, 12:32 AM #4
    derekcohen's Avatar
    derekcohen
    derekcohen is offline Be inspired. Be creative. Be bold.
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    9,037

    Default

    Nathan, that's the one. My website traces the development of the concept. The article in FWW just has the final design (using drawings).

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules