Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2004
    Location
    Perth
    Posts
    60

    Default Hot water systems

    Currently have a 20 yr old solar hotwater system that has an electric booster. Have just noticed that one of the tanks has started to leak. Was wondering whether it was viable to get it fixed or is this the life of these type of systems??
    Was otherwise considering getting gas onto the property and putting in a gas cylinder but unsure how much that would cost.
    Was just wondering if anyone had any thoughts on this or any other options.
    Cheers Stu

  2. #2
    Join Date
    Jan 2005
    Location
    Brisbane
    Age
    52
    Posts
    0

    Default

    Hey Stu,

    A couple of years ago I had an old gas storage 'tank' based system. It was leaking and costing us an fortune to run, as it was continually keeping the water at the preselected temparture.

    We decided to install a continous flow hotwater system, a Bosche to be precise. This turned out to be the best decision we made. We went from about $200 per quarter in gas bills to about $80 per quarter and we never run out of hotwater. We have individual controllers in each of the bathrooms and kitchens that allows you to set your desired temparature.

    Typically with normal water storage systems you end up using additional water as you cool your water down from about 50c to a more comfortable temparature - so you can save water with these. The flipside is it is very tempting to have longer showers, although with ours we have set a flow control alarm to let's us know when a certain amount of water has been used.

    Set up we have 3 45KG gas bottles that get filled every 3 months typically though they are no where near empty. Also they are used for our gas cook top so the $80 mentioned per quater covers daily use of the gas cooktop.

    Actual unit cost was about $1000, with a about $200 extra for the controllers (which are optional). Standard installation is about $250. Although with our we wanted the pipers to go a particular way.

    You will need a licensed electrician to install an external weatherproof gpo and also the controllers if required.

    So all up I think it was about a $2000 transition for us, but this was only slightly more costly than the electric or the gas storage proposition. I'm sure we are getting a good return on the investment with lower running costs, a reduction in water use, and the convenience of always available hot water.

Similar Threads

  1. Solar hot water
    By ozwinner in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 12
    Last Post: 19th March 2008, 08:47 AM
  2. Hot water system - Temperature regulations
    By notrot in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 19
    Last Post: 13th September 2005, 05:54 AM
  3. Gas hot water heaters
    By Bob Willson in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 28
    Last Post: 29th March 2005, 12:16 PM
  4. changing tap washers on hot water taps
    By jackiew in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 85
    Last Post: 6th May 2004, 06:43 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •