Results 1 to 8 of 8
  1. #1
    Join Date
    Aug 2003
    Location
    Sydney
    Posts
    0

    Default Help to save my woodworking

    Hi everyone,

    We just bought a flat with bathroom sink that you'll see on the attachment. I know it looks discusting and needs fixing pretty quickly, which is what SWMBO thinks anyway. She made sure that untill I fix this problem, I am not allowed to do my woodworking. As we'll be renovating at some stage, which is not in the near future due to the morgage, I need something within reasonable limits. I did shoping around and realised that the dimensions are custom made when the building was built. Getting it custom made will be pretty costly. What would be the alternative? Is there anyone I can tlak to in inner Sydney area?

    Cheers
    Sam

  2. #2
    Join Date
    Apr 2003
    Location
    Tolmie - Victoria
    Age
    68
    Posts
    1,058

    Default

    I can't see any photos Sam63.
    - Wood Borer

  3. #3
    Join Date
    Aug 2003
    Location
    Sydney
    Posts
    0

    Default

    Thanks for the quick reply woodborer. I always have problem with uploading images. It should eb OK this time.

    Cheers
    Sam
    Last edited by sam63; 25th September 2006 at 05:58 PM.

  4. #4
    Join Date
    Jul 2003
    Location
    Near Bodgy, AlexS, Wongo & CraigB
    Age
    19
    Posts
    744

    Default

    Sam,

    just get a smaller unit from bunnies, all you need is neat and clean I assume. the piping is easy - just use felxi tubing, also available from plumbing section of bunnies.

    just rawl plug it to the wall and its fixed. alternatively you can go to a recyling yard somehwere and you may find a complete unit of size that fits with taps etc already installed.

    R's
    Zed

  5. #5
    Join Date
    Aug 2003
    Location
    Sydney
    Posts
    0

    Default

    Thanks for the reply Zed. I wish I could get away with a smaller unit. It is currently installed in between the bath and the wall. If I remove it it will be a total mess. That is way I wanted to change the top. I'll have a look at the second hand yards as well.

    Cheers
    Sam

  6. #6
    Join Date
    Oct 2002
    Location
    Tin Can Bay, Queensland, Australia
    Age
    72
    Posts
    64

    Default

    Sam,

    Have a look underneath the top or the insides of the cabinet. They may have left behind some identity.

    Mind you those types of top are often custom made anyway and aren't that expensive.

    Your other choice is to find a surface mount sink of a size that you can cut a hole in the existing top to fit it.

    FWIW

    Jamie
    Perhaps it is better to be irresponsible and right, than to be responsible and wrong.
    Winston Churchill

  7. #7
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Or you could paint it with a 2 pack epoxy paint.
    Regards, Bob Thomas

    www.wombatsawmill.com

  8. #8
    Join Date
    Sep 2003
    Location
    Ipswich Queensland
    Age
    70
    Posts
    56

    Default

    If the top itself is OK you could cut the basin section out, including the tap holes, and drop a porcelain basin in. I'm not sure how you would cut the top. Try a jigsaw?

    regards

    John Scott

Similar Threads

  1. the worst woodworking day or dumbest thing you have done
    By doug the slug in forum HINTS & TIPS
    Replies: 80
    Last Post: 15th May 2006, 03:16 PM
  2. Woodworking Forums Worldwide
    By Rocker in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 13
    Last Post: 15th July 2004, 06:57 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •