![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Air Con Pipe Cover/Ducting
-
30th November 2006, 07:39 PM #1
Air Con Pipe Cover/Ducting
Hey guys, looking for ducting to cover the refrigerant pipes connecting a split system. I've used the PVC type but locally it will cost me about $150 for two air cons.
I'd like to use the colorbond or zincalume ones with clip on lids. Does anyone know who makes them? Near Tamworth would be good.
Cheers
Pulse
-
2nd December 2006, 04:35 PM #2
New Member
- Join Date
- Dec 2006
- Location
- Sydney
- Posts
- 1
Air Con Pipe Ducts
Am in the same boat. i need to find out where i can get them too as am fitting a system myself.
Thanks in advance.
D Toolman
-
3rd December 2006, 02:17 PM #3
G'day Joe, I ended up buying the plastic stuff from Heatcraft. It cost $80 for two air cons. The steel trunking was a bit cheaper but difficult to cut and sharp edges needed protection. In the heatcaft catalogue there was some cheaper ducting at $15 per length but he said they didn't stock it and the price was for tradies only.
I got the INOAC clean duct 75mm. I'll try to post photos when done.
Cheers Pulse
Similar Threads
-
Small Split System Air Con - Advice Please
By tcns in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 18Last Post: 11th January 2008, 12:46 AM -
Reducing cost of split system Air Con install
By Wildman in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 25Last Post: 10th October 2006, 08:02 PM -
DIY ducted air con
By jughead in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 8Last Post: 5th February 2004, 09:35 PM -
Australian Goverment Pipe Specifications
By trevorZ in forum JOKESReplies: 1Last Post: 28th May 2003, 12:59 AM