![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: New Woodturner in Scone
-
12th September 2013, 11:25 AM #1
New Member
- Join Date
- Jul 2013
- Location
- Scone
- Posts
- 2
New Woodturner in Scone
G Day mate,
My name is Alan. I am a self employed one man band builder. Started to turn about 2 yrs ago. Went to Q Turn and met gawdelpus who introduced me to this forum. Have a Vicmarc 150 and 175, will turn almost anything but a present into bowls and pens. Look foreword to sharing new ideas and tips. Always on the lookout for supplies of wood. Cheers Alan
-
13th September 2013, 06:34 PM #2
Welcome to the forum.
-
13th September 2013, 08:47 PM #3
G'Day, Welcome to a top forum "Alan".
You show find quite a few fellow members in and around the Hunter region.
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers, crowie
-
13th September 2013, 09:32 PM #4
Gidday Alan, welcome aboard and may your journey with us be a pleasant one.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
14th September 2013, 12:10 AM #5
welcome to the group