![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
14th May 2024, 11:06 PM #1
Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
Mean 300mm Metal Shear Homemade Under $150?
Has anyone got plan's for a sheet metal shear? Just something basic that i can place into my 20T hydraulic press, would ideally like 300mm cutting width
There are some on ebay but crazily priced think i seen 200mm for $600
There are hand operated shears the decent 300mm model is $266
If i could build one for under $150 that will work better than the above model would be fantastic, keep in mind i have the hydraulic press to place it into
Read the full thread at metalworkforums.com...