![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
-
5th June 2011, 11:25 AM #1
New Member
- Join Date
- Jan 2011
- Location
- Minneapolis
- Posts
- 4
Getting rid of a seam in Hard Shellac
I was attempting to do some solid body guitars with the Hardened Shellac. Timbermate pore filler in the wood, and enough shellac to get a nice even clearcoat. Let one month pass and now I have a seam on the glue line of the wood. You can see it from across the room if you catch the reflection right.
Can I scuff sand the shellac with some 320 grit, and use Behlen vynil sealer and lacquer on top of the shellac? I am eventually going to sell these guitars and cannot have such noticeable flaws. Please help!
-
5th June 2011, 02:53 PM #2
is it the shellac that has left a line on application, or something else? In my limited experience, I'd be thinking alng the lines of a complete sand back and refinish. I agree, it's so frustrating when this happens in a finish.
Box Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
5th June 2011, 05:11 PM #3
Similar Threads
-
Hard Shellac for outside use?
By Sebastiaan56 in forum FINISHINGReplies: 2Last Post: 4th July 2010, 06:35 PM -
Ub Shellac Not Hard Enough?
By Barry F in forum FINISHINGReplies: 6Last Post: 1st November 2006, 09:39 PM -
Hard Shellac
By Shaty40 in forum FINISHINGReplies: 2Last Post: 9th July 2005, 10:36 AM -
New use for Hard Shellac
By Chesand in forum FINISHINGReplies: 9Last Post: 27th January 2005, 08:55 PM