Results 1 to 11 of 11
  1. #1
    Join Date
    May 2023
    Location
    Melbourne
    Age
    56
    Posts
    20

    Default Flex hose - reputable brands??

    Anyone know of reputable flex hose brands?

    Need to go through and replace all hoses as they are all over 10 years old.

    Was thinking of replacing some with copper pipe eg: toilets but not sure if its worth the effort

  2. #2
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    Why do they need replacing?
    The person who never made a mistake never made anything

    Cheers
    Ray

  3. #3
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    63
    Posts
    189

    Default

    It does happen that these flexible hoses burst. The resultant damage can be quiet extensive if it is not quickly noticed and the water turned off.

    Think of water logged cupboards, sodden floors and more!

  4. #4
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    Quote Originally Posted by Bart1080 View Post
    Anyone know of reputable flex hose brands?

    Need to go through and replace all hoses as they are all over 10 years old.

    Was thinking of replacing some with copper pipe eg: toilets but not sure if its worth the effort
    Ram Tapware do a 15year warranty for general flex hoses.
    I don't know if it is the same warranty for the mixer tap hoses.
    Replace what you can with copper (chrome copper for toilets) if you can do it yourself, otherwise just replace the flex hoses.

  5. #5
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    70
    Posts
    228

    Default

    The NRMA sent me an Email suggesting that I should change all Easy Hooker if more than 10years old. I think that they have had a lot of water damage in wet areas after the Easy Hookers had failed. I had a leak from the roof top swampy and found an Easy there had failed and was leaking onto the roof (thankfully) and it is only 5 years old
    Just do it!

    Kind regards Rod

  6. #6
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    Quote Originally Posted by chambezio View Post
    The NRMA sent me an Email suggesting that I should change all Easy Hooker if more than 10years old. I think that they have had a lot of water damage in wet areas after the Easy Hookers had failed. I had a leak from the roof top swampy and found an Easy there had failed and was leaking onto the roof (thankfully) and it is only 5 years old
    Roof top swampy ???

    Flex connectors are not made for external use as the stainless braid rusts allowing the inner rubber tube to burst.
    Another problem with them in cupboards can be premature aging due to chemicals from hair sprays etc etc
    And yes, insurers have been known to pay dearly for bursting leaking problems
    Worst one I saw was a 2 level home where the joiner between the rheem solar hot water panels on the roof had burst (for the second time.)
    First time it sprayed straight up in the air, no damage, but second time not so lucky, sprayed straight at the front and under the roof tile all day long
    and flooded the home from top to bottom.

  7. #7
    Join Date
    May 2023
    Location
    Melbourne
    Age
    56
    Posts
    20

    Default

    Quote Originally Posted by rambunctious View Post
    Replace what you can with copper (chrome copper for toilets) if you can do it yourself, otherwise just replace the flex hoses.

    ...so if I replaced with copper (toilets), I'm guessing I'd also need to replace the flex hose screw on fitting thats sitting on the wall. I'd take a guess there are no suitable fittings to attach to the end of the copper pipe to attached to the flew hose wall fitting?

  8. #8
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    Quote Originally Posted by Bart1080 View Post
    ...so if I replaced with copper (toilets), I'm guessing I'd also need to replace the flex hose screw on fitting thats sitting on the wall. I'd take a guess there are no suitable fittings to attach to the end of the copper pipe to attached to the flew hose wall fitting?
    One of my toilets DSCN1051.JPG

  9. #9
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    287

    Default

    If these things are installed correctly (no kinks) and aren’t in a corrosive environment, I don’t see how they can fail.

  10. #10
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    Quote Originally Posted by jack620 View Post
    If these things are installed correctly (no kinks) and aren’t in a corrosive environment, I don’t see how they can fail.
    I'm sure people whose homes have been damaged by failures of flex connectors thought the same as you.
    And FWIW a toilet is a corrosive environment, and, as I have already mentioned, so are the contents of some cupboards.

  11. #11
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    287

    Default

    Quote Originally Posted by rambunctious View Post
    I'm sure people whose homes have been damaged by failures of flex connectors thought the same as you.
    Do you think so? I suspect they never thought about it at all, and missed the corroded braiding. I've checked all mine and none have any corrosion after nearly 20 years.

    Quote Originally Posted by rambunctious View Post
    And FWIW a toilet is a corrosive environment, and, as I have already mentioned, so are the contents of some cupboards.
    I never said they weren't. I said if they weren't in a corrosive environment they shouldn't fail. I made no comment about what is and isn't a corrosive environment. That said, my three toilets haven't caused any corrosion on my braided flex hoses.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •